FMP200FBE52-1K27

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors - such as the FMP200FBE52-1K27 pictured here - are resistors that are mounted in holes drilled into a printed circuit board (PCB). These type of resistors are manufactured to fit the holes or “throughs” in a PCB and work by providing a specific resistance to current flow.

The FMP200FBE52-1K27 is a 2W through hole resistor manufactured by Panasonic. It has a resistance of 1kΩ and is a type of wire wound resistor. This means that a metal wire coated in a resistive material is wound in a spiral onto a cylinder-shaped core made of ceramic.

The FMP200FBE52-1K27 is a versatile through hole resistor that finds applications in a variety of industrial settings. Such includes applications in AC power supplies and motor drives, not to mention inavigation, radio transmitting, and telecommunications products.

The working principle of the FMP200FBE52-1K27 is similar to other types of resistors. When electric current passes through it, the wire heats up, creating resistance and dissipating the energy as heat. This heat energy is then removed through the use of a heatsink and/or coolant.

The current that passes through the resistor is dictated by the ohmic value and voltage based on Ohm’s Law, which states that current is proportional to voltage divided by the resistance. This resistance is determined by measuring the value with a meter. Additionally, the power rating of the resistor is also an important factor. In the case of the FMP200FBE52-1K27 it is rated for 2W.

When purchasing a through hole resistor for a PCB, it is important to choose one that meets the required resistance and power rating. Additionally, the size of the resistor is an important factor as it will determine if it will fit into the required hole size of the printed circuit board. The FMP200FBE52-1K27 is designed to fit into a 6mm hole, making it highly compatible with most standard PCBs.

Installing the FMP200FBE52-1K27 is relatively easy. Simply insert the resistor into the hole on the PCB, and then use a soldering wire to secure it into place. Afterwards, the resistor should be checked to make sure that the wires are connected to the correct terminals and that the resistor is firmly secured in the hole.

In conclusion, the FMP200FBE52-1K27 is a versatile through hole resistor manufactured by Panasonic that is capable of providing a specific resistance to current flow. This resistor has a resistance of 1kΩ and is rated for 2W, making it ideal for a variety of industrial and telecommunications applications. Additionally, its 6mm size makes it highly compatible with most standard printed circuit boards.

The specific data is subject to PDF, and the above content is for reference