FMP200FRE52-2K61

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of electrical component primarily used in the field of electronics and electrical engineering. A Through Hole Resistor consists of a metal oxide resistor element connected to an external copper body via two terminals. FMP200FRE52-2K61 is a Through Hole Resistor manufactured by Eaton. The main features and applications of the FMP200FRE52-2K61 are outlined below.

Features

The FMP200FRE52-2K61 is a high-precision, industrial-grade Through Hole Resistor with a resistive value of 2000 ohms. It features a temperature coefficient (TCR) of 20ppm/°C and a tolerance of ±2%, which means it is able to maintain its pre-calibrated value even under extreme temperatures. These features make it an ideal component for precision circuits. It has a power rating of 0.5 Watts and an operated temperature range of -55°C to 200°C. The FMP200FRE52-2K61 has a dielectric withstanding voltage of 250 Volts AC.

Applications

The FMP200FRE52-2K61 is suitable for medical, aerospace and automotive applications that require frequent temperature changes, high precision, and reliable resistive values. It is typically used in industrial machine control systems, precision circuit designs, and applications where voltage and current stability are important. The FMP200FRE52-2K61 is used in a wide range of applications, such as aviation systems, consumer electronics, automotive electronics, industrial equipment, and medical devices.

Working Principle

The working principle of the FMP200FRE52-2K61 Through Hole Resistor is based on the fact that when an external voltage is applied across the terminals, current will flow through it. The material used to construct the device is resistant to the flow of current, so the current will be less than what would normally flow in a circuit without a resistor. This resistance is what makes the resistor useful and is what gives it its resistive value. The value of the resistor is determined by the material it is made of and the size of its terminals.

The FMP200FRE52-2K61 is a two-terminal Through Hole Resistor. It is designed to be soldered directly to a circuit board using a soldering iron and solder. Once soldered, it is electrically connected between two points in the circuit, allowing current to flow through it. The resistor\'s resistive value will influence the amount of current that is allowed to flow through it, thereby controlling the current and voltage in the circuit.

The FMP200FRE52-2K61 is a reliable and highly accurate Through Hole Resistor, making it suitable for a wide range of industrial, automotive, and consumer electronics applications that require precision and reliable resistive values. Its small size and ability to operate in extreme temperatures further enhance its appeal for industrial and automotive designers.

The specific data is subject to PDF, and the above content is for reference