FMP200FBE52-48R7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are an integral part of nearly all electronic circuits. The FMP200FBE52-48R7 is an example of such a resistor, designed for through hole installation. This resistor is a tried and true component for many applications.

The FMP200FBE52-48R7 is a 200 ohm resistor with a tolerance of +/- 1%. It comes in an 1206 standard package and is generally used in board-level applications. This resistor has a wide temperature range operation of -55 to +125°C and a maximum power dissipation of 200mW. The feed through hole has a diameter of 0.86mm and a clearance hole for the component leads of 1.7mm. These resistors feature a waterproof and environmentally sealed design.

The FMP200FBE52-48R7 is most generally used in power supplies, resonance circuits, common mode filters, daemons, and motor drives. This resistor is perfectly suited for high frequency applications and is most often in situations where a high level of accuracy is required. Its 200 ohm resistance value is ideal for lower current applications, and its 1206 package size allows it to fit in places that many other resistors cannot go.

The working principle of the FMP200FBE52-48R7 is fairly simple. In an electrical circuit, current flows in a clockwise direction. When the current passes through the resistor, it reduces the strength of the current. This process helps to ensure that power is not wasted, and prevents the electrical components connected to the resistor from being damaged. This resistor works by reducing the electric current flowing from one node to the other, thus maintaining the voltage on both sides of the resistor at a constant level.

In addition to its use in electrical circuits, the FMP200FBE52-48R7 can also be used in applications such as controlling the current flow in a Wheatstone bridge. The Wheatstone bridge is used to measure small AC signals. As the voltage on one side of the bridge increases, the current on the other side will decrease. By adding a resistor to the bridge, the current flow on the other side can be regulated, allowing for accurate measurements to be taken.

The FMP200FBE52-48R7 through hole resistor from FMP is an excellent choice for many applications. Its 200 ohm resistance value and 1206 package size make it suitable for a wide range of projects. Furthermore, its waterproof and environmentally sealed design make it perfect for applications where temperature and humidity may be a concern. Its wide temperature range and tight tolerance also make it an ideal choice for many projects when a high level of accuracy is required.

The specific data is subject to PDF, and the above content is for reference