FOD270LT

Output Type:	Darlington with Base
Supplier Device Package:	8-DIP
Package / Case:	8-DIP (0.400", 10.16mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Vce Saturation (Max):	--
Current - DC Forward (If) (Max):	20mA
Voltage - Forward (Vf) (Typ):	1.35V
Current - Output / Channel:	60mA
Voltage - Output (Max):	7V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	--
Turn On / Turn Off Time (Typ):	3µs, 50µs
Current Transfer Ratio (Max):	7000% @ 500µA
Current Transfer Ratio (Min):	400% @ 500µA
Voltage - Isolation:	5000Vrms
Number of Channels:	1
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electrical components that help to provide electrical isolation between a device\'s input circuit and its output circuit. This isolation can be very useful for protecting delicate circuitry from potential electrical damage caused by overvoltages or other environmental contaminants. One type of optoisolator, the FOD270LT, is a transistor, photovoltaic output device. In this article, we\'ll discuss how a FOD270LT works and its applications.The FOD270LT is a three-pin device consisting of an LED light source and two photoconductor elements. The first photoconductor (which is also referred to as the photodiode) is located in close proximity to the LED light source and the second photoconductor (which is also referred to as the phototransistor) is located on the other side of the device. When power is applied to the LED light source, it emits a beam of light which is absorbed by the photodiode and then converted into an electrical current. This current passes through the photosensitive gate of the phototransistor, causing it to be switched on or off. When the phototransistor is switched on, current is allowed to flow through the second circuit.The FOD270LT can be used in a variety of applications where electrical isolation between two circuits is required. For example, it can be used to protect motor controls and other sensitive circuits from potential external interference and voltage spikes. It can also be used in telecommunications and data transmission applications, where it provides electrical isolation between the transmitter and receiver. The FOD270LT can also be used for signal level conversion, allowing an input circuit with a different voltage level to be connected to an output circuit with a different voltage level.The FOD270LT is especially suited for applications requiring a low-power operation. This is due to its low power consumption and the fact that it does not require any additional components such as resistors or capacitors to operate properly. Additionally, it can be used in harsh environments where other optoisolators cannot function due to the intense temperatures.In summary, the FOD270LT is a three-pin photovoltaic output optoisolator with numerous applications. It provides electrical isolation between two circuits, allowing signals and currents to pass between them without the risk of damage. It has low power consumption and can be used in harsh environmental conditions. Additionally, it can be used for signal level conversion.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description