FOD2712A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electrical components that use a light source (transmitter) and a sensor (receiver) to make a connection between two circuits while isolating them from each other. The FOD2712A is an opto-isolator that consists of a silicon phototransistor, and a light emitting diode (LED) coupled in the same package. This device provides an electrical isolation barrier between one circuit and another, and offers a compact and cost-effective method for interfacing between the two.

The FOD2712A opto-isolator has a typical response time of 500 μs, allowing for fast signal detection and switching. It has a current transfer ratio (CTR) of 300% at 70 mA driving current, making it suitable for use in switching applications. The device has a maximum forward voltage drop of 1.5 V and a maximum reverse leakage current of 30 μA, ensuring low power consumption. It is rated for operation over a wide temperature range, from -40°C to 125°C, making it suitable for a variety of applications.

The FOD2712A opto-isolator works by using a light-emitting diode, which is used to transmit an optical signal across a gap, to a silicon phototransistor located on the other side. The optical signal is generated when the input voltage is applied to the LED. This causes the LED to emit a beam of light, which is detected by the phototransistor. This causes a current to flow through the collector and out of the emitter, thus providing the isolated output.

The FOD2712A opto-isolator can be used in a variety of applications, ranging from simple relay-drive circuits, to protection circuits designed to prevent damage from electrical surges. It can be used to interface different circuits with different levels of voltage, and is ideal for applications where isolation is required, such as motor control and noise reduction. It is also useful in medical equipment, as it provides electrical isolation between the medical device and the user.

The FOD2712A opto-isolator is a compact and cost-effective solution for providing electrical isolation between two circuits. It is capable of operating over a wide temperature range, and has a fast response time, making it suitable for use in a variety of applications. The device is an ideal choice for protection from electrical surges, isolation of circuits with different voltage levels, and motor control.

The specific data is subject to PDF, and the above content is for reference