FR154-AP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The FR154-AP is a single diode rectifier module that is used in low and medium power applications. It is a general-purpose diode and is suitable for use in a variety of applications, including rectification, protection, and voltage regulation. The FR154-AP is commonly used in consumer electronics, automotive, and industrial applications.

The FR154-AP has a forward voltage drop of 1.4V and a maximum continuous current rating of 1.5A. Its features include low forward voltage drop, low leakage current, low power consumption, and high performance. The device also has a high surge current capability and a short recovery time.

The FR154-AP is a surface mount device, which allows it to be mounted easily on a circuit board. The device comes in four packages: TO-126, TO-220, Micro-8 and Micro-9. The TO-126 package is the most common and has four leads with a mounting hole in the center. The TO-220 package is designed for higher power applications. It has three leads, with a mounting hole in the center. The Micro-8 and Micro-9 packages have eight and nine leads respectively and are designed for space-constrained applications.

The FR154-AP utilizes diodes to rectify alternating current by only permitting current to flow in one direction. The diode has a threshold voltage, which prevents current from flowing until the voltage across the diode exceeds this threshold. When the voltage does exceed the threshold, the diode quickly switches and permits current to flow. This switching action is known as "saturation".

When the voltage passes through the negative-going half-wave, a reverse bias is applied to the diode, which prevents current from flowing. This is known as the "reverse blocking" action of the diode. This action allows the diode to act as a "flywheel" and prevent excessive current from flowing in the opposite direction.

The FR154-AP can also be used as a voltage regulator. This is achieved by applying the desired voltage to a circuit, then connecting the diode between the supply and the load. As the current passes through the diode, the threshold voltage is applied across the diode, thus regulating the voltage output.

The FR154-AP is an efficient way to perform rectification and voltage regulation. Its low forward voltage drop, high surge current capability, and low leakage current make it an ideal choice for a variety of low and medium power applications. It is widely used in consumer electronics, automotive, and industrial applications.

The specific data is subject to PDF, and the above content is for reference