FS32K144HFT0VLLT

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Feature

    1. Operating characteristics

        – Voltage range: 2.7 V to 5.5 V

        – Ambient temperature range: -40 °C to 105 °C HSRUN mode, -40 °C to 150 °C for RUN mode

    2. Arm™ Cortex-M4F/M0+ core, 32-bit CPU

        – Supports frequencies up to 112 MHz 1.25 Dhrystone MIPS per MHz

        – Arm Core and Thumb®-2 ISA based on Armv7 architecture

        – Integrated digital signal processor (DSP)

        – Configurable Nested Vectored Interrupt Controller

        – Single-precision floating-point unit (FPU)

    3. Clock interface

        – 4 - 40 MHz fast external oscillator (SOSC) to 50 MHz DC external square wave input clock external clock mode

        – 48 MHz Fast Internal RC Oscillator (FIRC)

        – 8 MHz slow internal RC oscillator (SIRC)

        – 128 kHz Low Power Oscillator (LPO)

        – Up to 112 MHz (HSRUN) System Phase Lock Loop (SPLL)

        – Up to 20 MHz TCLK and 25 MHz SWD_CLK

        – 32 kHz real-time counter external clock

    4. Energy management

        – Low-power Arm Cortex-M4F/M0+ core with excellent energy efficiency

        – Has multiple power management controller power modes: HSRUN, RUN, STOP, VLPR and very large aircraft.

        – Supports clock gating and low-power operation of specific peripherals.

    5. Memory and memory interfaces

        – Program Flash with ECC up to 2 MB

        – 64 KB FlexNVM for data flash and EEPROM emulation with ECC.

        – Up to 256 KB SRAM with ECC

        – Up to 4 KB of FlexRAM as SRAM or EEPROM emulation 

        – Up to 4 KB code cache to minimize performance memory access latency impact

        – QuadSPI with HyperBus™ support

    6. Mixed-signal simulation

        – Up to two 12-bit analog-to-digital converters, up to 32 analog input modules per channel

        – A digital-to-analog converter (DAC) with an internal 8-bit analog comparator (CMP)

    7. Debug function

        – Serial Wire JTAG Debug Port (SWJ-DP) combination

        – Debug Watchpoints and Traces (DWT)

        – Instrument Tracking Macrocell (ITM)

        – Test Port Interface Unit (TPIU)

        – Flash Patch and Breakpoint (FPB) unit

    8. Human Machine Interface (HMI)

        – Up to 156 GPIO pins with interrupt capability

        – Non-Maskable Interrupt (NMI)

    9. Communication Interface

        – Up to three low-power universal asynchronous receiver/transmitter modules with DMA support and low-power availability

        – Up to three low-power serial peripheral interface (LPSPI) modules with DMA support and low-power availability

        – Up to two low-power inter-integrated circuit (LPI2C) blocks with DMA support and low-power availability 

        – Up to three FlexCAN modules

        – FlexIO modules to emulate communication protocols and peripherals.

        – Up to one 10/100Mbps Ethernet supporting IEEE1588 and two Simultaneous Audio Interface (SAI) modules.

  10. Safety and Security

        – The Cryptographic Services Engine (CSEc) implements a comprehensive set of cryptographic functions such as SHE functional specification.

        – 128-bit unique identification (ID) number

        – Error Correcting Code (ECC) on Flash and SRAM memory

        – System Memory Protection Unit (System MPU)

        – Cyclic Redundancy Check (CRC) module

        – Internal Watchdog (WDOG)

        – External Watchdog Monitor (EWM) module

  11. Timing and Control

        – Up to 8 independent 16-bit FlexTimers (FTM) modules providing up to 64 standard channels (IC/OC/PWM)

        – A 16-bit low-power timer (LPTMR) with flexible wake-up control

        – Two programmable delay blocks (PDBs) with flexible trigger system

        – 1 32-bit Low Power Interrupt Timer (LPIT) with 4 channels

        – 32-bit real-time counter (RTC)

  12. pack

        – 32-pin QFN, 48-pin LQFP, 64-pin LQFP, 100-pin LQFP, 100-pin MAPBGA, 144-pin LQFP, 176-pin LQFP packagesOptions

  13. 16-channel DMA using DMAMUX, up to 63 request sources

2. Pin configuration