FT232BQ-REEL Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FT232BQ-REEL Application Field and Working Principle

Introduction: FT232BQ-REEL is a chip type USB to serial UART interface and it is a high performance interface chip that can support a wide range of applications. The FT232BQ-REEL features a standard UART interface, which is commonly used in many types of application areas such as industrial systems, automotive systems, and communication controllers. It is also a good choice for embedded systems such as those used in medical and other healthcare applications.

Application Field

FT232BQ-REEL is versatile and can be used in a range of applications including automotive communications, industrial systems and communication controllers. The FT232BQ-REEL provides a reliable, single piece interface for designers who require an industry standard UART interface. Common application areas include: industrial systems, automotive communications, flexible real-time communication applications and communication controllers.

FT232BQ-REEL is also well suited for embedded systems in medical and other healthcare applications. In medical applications, FT232BQ-REEL is often used to send commands to medical devices and monitor their data transmission. It makes it easier to control multiple medical devices by using one single chip. This makes it a suitable choice for medical and healthcare applications.

In automotive communication, FT232BQ-REEL has been implemented in many vehicles. It has been used to receive, transmit and process user interface data, such as speed and other vital information. Due to its fast data transfer, FT232BQ-REEL is well suited for automotive communication in applications where data speeds are critical.

Working Principle

FT232BQ-REEL operates by combining a UART Controller Core, which controls the data transmission, with a built-in USB host interface that enables the UART controller to communicate with the host system via USB. The communication interface consists of four pins, Vbus, Rx, Tx and GND. The Vbus pin is used to supply power to the FT232BQ-REEL IC. The Rx and Tx pins are the transmission lines used to send and receive data to and from the external device. The GND pin is used to ground the device.

FT232BQ-REEL uses the Universal Asynchronous Receiver/Transmitter (UART) communication protocol for data transmission. This protocol allows for asynchronous communication between two devices by breaking up the data stream into blocks or characters, thus eliminating any waiting time between characters.

FT232BQ-REEL is powered by the USB host interface and has a maximum power consumption of up to 500mA. The FT232BQ-REEL requires only a single 5V power supply and an external resistor. The external resistor provides the recommended operating voltage for the interface chip.

The FT232BQ-REEL supports two data speeds of 9600 baud and 115200 baud, which are suitable for most applications. The chip also features two-wire handshaking with hardware flow control and has a programmable UART timeout.

In summary, FT232BQ-REEL is a high performance USB to serial UART interface chip that supports a wide range of applications. It is well suited for industrial systems, automotive communications, flexible real-time communication applications and communication controllers. It is also a good choice for embedded systems such as those used in medical and other healthcare applications. It operates by combining a UART Controller Core with a built-in USB host interface and is powered by the USB host interface. The chip supports two data speeds of 9600 baud and 115200 baud and supports two-wire handshaking with hardware flow control.

The specific data is subject to PDF, and the above content is for reference