FT24C02A-UTG-B

Series:	--
Packaging:	Tube
Part Status:	Discontinued at Digi-Key
Memory Type:	Non-Volatile
Memory Format:	EEPROM
Technology:	EEPROM
Memory Size:	2Kb (256 x 8)
Clock Frequency:	1MHz
Write Cycle Time - Word, Page:	5ms
Access Time:	550ns
Memory Interface:	I²C
Voltage - Supply:	1.8 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-TSSOP (0.173", 4.40mm Width)
Supplier Device Package:	8-TSSOP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

FT24C02A-UTG-B is a 2K-bit (256-byte) Serial Electrically Erasable Programmable Read-only Memory (EEPROM) that is designed for use at enhanced temperature ranges of -40°C to 125°C. This device employs two-wire I2C-compatible serial interface. FT24C02A-UTG-B can be used as a standalone non-volatile memory solution and is ideal for applications where data needs to be stored in hostile environments such as automotive and industrial control applications.

Application Fields

FT24C02A-UTG-B is used in automobile and industrial control applications which require a non-volatile memory to store data in a hostile environment. These include applications such as Ignition Control, Engine Control, Airbag Sensors, Communication Systems, Steering Angle Sensors, Temperature Control, Factory Automation, Data Logging Control, and Industrial Process Control. FT24C02A-UTG-B can be used in a variety of applications where data or settings need to be stored in a non-volatile form, such as system configuration, factory settings, and remote parameters.

Working Principle

FT24C02A-UTG-B is designed to be easy to use, where users can store and retrieve data with minimal I2C programming. It is equipped with two 8-bit registers for storing data within the memory. These registers are used for address selection, and the write and read operations are performed on a single-byte or multiple-byte basis. During write operations, the write cycle must be initiated each time a data byte needs to be written. During read operations, the memory pointer can issue an address and data will be output in a continuous stream.The FT24C02A-UTG-B also includes an 8-bit status register. This register is used to check status information, such as the currently selected memory address and the write operation status. FT24C02A-UTG-B also includes a 16-bit status register, which can be used to read-back any existing errors.

Conclusions

The FT24C02A-UTG-B is a 2K-bit serial electrically erasable programmable read-only memory that can be used for applications in hostile environments. It is designed to be easy to use, and features two 8-bit registers for storing data, an 8-bit status register for checking status information, and a 16-bit status register for reading back errors. This device is ideal for automotive and industrial control applications which need to store data in a non-volatile form.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description