FXE10-10M20Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AnFXE10-10M20Y is a type of electrical contactor available from Eaton. It is a two-pole device designed for use with control circuits that have an operating voltage of either 120 or 240 volts. The device can be used to control motor loads of up to 10 horsepower, and its control capacity is rated at 20A. It is UL listed and CSA approved to Canadian and U.S. standards and is also covered by a manufacturer’s five-year limited warranty.

The main application field of this contactor is motor control. A variety of motor control applications can be used with the FXE10-10M20Y, such as load switching, reversing motors, overload protection, and motor starting. The contactor is used in conjunction with other air conditioner components such as relays and switches to control the operation of a motor. It is also common to use a contactor in combination with a timer to control the starting and stopping of an air conditioning unit.

The working principle of the FXE10-10M20Y contactor is based on an electromechanical relay. The contactor consists of an electromagnet, a metal core, and contact points. The assembly is enclosed by a plastic housing. The electromagnet is energized when current is supplied to the contactor, which in turn pulls the core towards it and closes the contact points. When the power to the electromagnet is switched off, the core is released and the contact points open. This allows the motor to experience a controlled start and stop.

In addition to motor control applications, the FXE10-10M20Y contactor can also be used in other electrical circuits to provide overload protection. The device has an overload relay built in which will open the contactor’s contacts in case of an overcurrent event. This prevents the overload from damaging the connected motor.

Finally, the FXE10-10M20Y contactor can be used in applications involving multiple switches. In these cases, the contactor can be wired in series with other switches, allowing the control circuit to be toggled between different settings depending on the switch used.

The FXE10-10M20Y contactor is a reliable and versatile device that can be used for a wide variety of motor control applications. It is UL and CSA listed, and is covered by a manufacturer’s five-year limited warranty. Used in combination with other components, such as relays and timers, the contactor can be used to control air conditioners or other motor loads, as well as for providing overload protection.

The specific data is subject to PDF, and the above content is for reference