G3PA-430B-VD DC12-24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid state relays (SSR) are electrical devices that are used as an alternative to traditional electromechanical relays. SSRs have no moving parts, and operate using transistors, semiconductor switches, or integrated circuit circuits. Unlike electromechanical relays, SSRs have no contact bounce and are capable of switching much faster. They are also more reliable and require little maintenance. The G33PA-430B-VD is a DC 12-24V solid state relay. Due to its wide voltage range and reliable performance, the G3PA-430B-VD is suitable for a variety of applications.

G3PA-430B-VD DC 12-24V Application Field and Working Principle

The G3PA-430B-VD DC 12-24V solid state relay is suitable for applications such as heating, lighting, and other DC/AC loads. This SSR is designed for applications where an electrical load needs to be switched rapidly, frequently, and reliably. The G3PA-430B-VD can control resistive, capacitive, inductive, and other loads with a maximum current of 5A and maximum voltage of 250V. This SSR is also designed to be used in environments with high levels of interference, such as industrial manufacturing and medical equipment.

The G3PA-430B-VD DC 12-24V solid state relay works by using a transistor as a switch. When the voltage across its terminals is higher than the pre-set level, the transistor will turn on and close the circuit, allowing current to flow, which causes the load to be switched on. When the voltage across the terminals is lower than the pre-set level, the transistor will turn off, opening the circuit, which causes the load to be switched off. The G3PA-430B-VD has a pre-set level of between 12V and 24V, so it is suitable for both low and high voltage applications.

In addition to switching loads, the G3PA-430B-VD can also be used to measure and detect changes in voltage or current. This SSR is designed with digital and analog inputs, so it can measure the voltage and/or current across its terminals and act accordingly. If the voltage or current goes above or below a certain pre-set level, the G3PA-430B-VD will switch the load on or off automatically.

The G3PA-430B-VD DC 12-24V solid state relay is a reliable and efficient device that has a wide range of applications. It is suitable for switching heating, lighting, and other electrical loads, as well as for measuring and detecting changes in voltage and current. It can handle up to 5A of current and 250V of voltage, making it suitable for both low and high voltage applications.

The specific data is subject to PDF, and the above content is for reference