GP02-20-E3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GP02-20-E3/54 is a single rectifier diode. It has a variety of applications in the world of electronics.

The diode is used to convert alternating current (AC) to direct current (DC) and to provide over-voltage protection with its fail-safe design. The most common use of this type of diode is as a rectifier in power supplies where AC input is converted to DC output. It is also used for voltage regulation to prevent over-voltage or ground shorts.

The GP02-20-E3/54 is designed to withstand large transient voltages. It has a forward voltage of 1.2V, reverse voltage of 20V and current rating of 3A. It is designed to offer superior protection from damaging transients and high peak surge currents, and can withstand up to 5000 pulses of 8A peak current.

The working principle of GP02-20-E3/54 is based on the fact that a diode allows current to flow in one direction and blocks the reverse flow. The diode has a unique construction that contains two doped regions. The forward or anode region has an excess of positive charge carriers, while the reverse or cathode region has an excess of electrons. As such, the diode can only allow current to flow in one direction when the anode is more positive than the cathode. When a diode is used as a rectifier, it works by blocking the negative half cycles of incoming AC current, while allowing the positive half cycles to pass through.

GP02-20-E3/54 is also used for voltage regulation and provides over-voltage protection with its fail-safe design. It works by establishing a maximum passable AC voltage, i.e., the values above the threshold of a rectifier diode will be blocked, whereas those below the threshold will be passed on. This means that any voltages above the threshold will be blocked, and any voltages below the threshold will be allowed to pass through.

GP02-20-E3/54 can also be used for protection against over-voltage and ground dynamic stresses. It works by allowing a small amount of energy to be released when it senses a sudden spike in voltage or current. It then absorbs this energy and ensures that the downstream circuitry remains protected from the high transient voltages and currents, thereby ensuring its safety.

GP02-20-E3/54 can be used in a variety of applications, ranging from automotive power supplies to home appliances, industrial motor control systems, and power supplies for computers, telecommunications, or consumer electronics. It is also used in hybrid vehicles, electric vehicle power supply systems, photovoltaic and solar energy applications, and other industrial applications that require overvoltage protection.

The specific data is subject to PDF, and the above content is for reference