GSD2004C-E3-08

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GSD2004C-E3-08 application field and working principle

The GSD2004C-E3-08 is a type of rectifier array. Rectifier arrays are electrical devices with internal diodes that are used to provide high-frequency current rectification or to block high-frequency signals. Typically they feature several diodes in different configurations that allow high-speed performance over a broad range of currents. The GSD2004C-E3-08 is no exception, offering a compact SMD design with four diodes joined together to provide two chokes.

Within the GSD2004C-E3-08, the four diodes are arranged in a package consisting of eight pins which are arranged in a loop. This arrangement is known as the distributed-line rectifier array (DLRA), as the entire package can be used as a current-limiting circuit. The array is also referred to as a half-bridge rectifier array due to its two-channel operation. In each of the two channels, two of the diodes are connected in series and form the "internal bridges" that makes the array a rectifier.

The GSD2004C-E3-08 is most often found in the control systems and power supply units of modern electronic equipment. In these areas, it is important to provide a swift and accurate current rectification solution; the GSD2004C-E3-08 is able to do this fast, efficiently and with excellent signal integrity, as well as being capable of sustaining high signal frequencies.

The internal diodes within the GSD2004C-E3-08 mean that when current is applied in the forward direction, it is rectified and cannot flow in the reverse direction. This combination of the two-way operation of the diodes and the effective choke formed by the two internal bridges essentially makes the rectifier array a two-way switch: it acts as an on/off switch for current flow. If a voltage difference is applied between two of the GSD2004C-E3-08’s leads, current will flow from the higher potential lead to the lower potential lead: it is not possible for current to flow in the opposite direction.

The GSD2004C-E3-08 is an efficient solution for high-frequency rectifier needs. Its solid-state design makes it highly durable, able to withstand harsh environmental conditions while providing precise and fast current rectification. Its internal bridges also provide an effective "choke" to limit current flow, protecting sensitive electronic components and helping to increase energy efficiency.

The specific data is subject to PDF, and the above content is for reference