GSXD050A018S1-D3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GSXD050A018S1-D3 is a three-phase full-wave rectifier made of diodes. It is a general-purpose rectifier used in applications such as automobiles, computers, and other electronic devices. The GSXD050A018S1-D3 is a rectifier array of six diodes which is commonly referred to as a bridge rectifier. The bridge rectifier is used to convert AC current to DC current. It is a reliable, simple, and cost-effective rectifier circuit.

The bridge rectifier consists of four diodes connected in a closed loop between two AC terminals. The GSXD050A018S1-D3 has six diodes instead of four because it provides extra protection against overvoltage. The extra two diodes provide protection against voltage too high in one of the AC phases. This allows the rectifier to be used in applications with non-balanced voltages or in applications which require redundancy.

The operating principle of the bridge rectifier is that when an alternating current (AC) voltage is applied at the terminals, the positive half cycle of the AC voltage will cause one of the two diodes connected to the positive terminal to conduct, while the negative half cycle of the AC voltage will cause the other diode connected to the negative terminal to conduct. This will produce a unidirectional current flow. The diodes in the GSXD050A018S1-D3 are constructed using silicon wafers, which have a forward voltage drop of approximately 0.7V. Ultimately, the bridge rectifier will produce a DC voltage that is lower than the original AC voltage, due to the losses caused by the forward voltage drop.

The most common application of bridge rectifiers is in power supplies, where they are used to convert AC voltage to DC voltage. The GSXD050A018S1-D3 is able to handle large currents, making it suitable for use in high power applications such as electrical railways and automobile electronics. It is also suitable for use in small current applications such as in computers and consumer electronics. The GSXD050A018S1-D3 is available in a variety of packaging options, making it suitable for applications with limited space.

The GSXD050A018S1-D3 is a widely-used rectifier due to its reliability, simplicity, and low cost. It is widely used in applications that require converts AC current to DC current, including automobiles, computers, and other consumer electronics. The rectifier is also widely used in applications that require redundancy.

The specific data is subject to PDF, and the above content is for reference