GSXF100A060S1-D3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A GSXF100A060S1-D3 is a rectifier module used in many different applications. It is a diodes-and-arrays type module. The module has four main components: the rectifier bridge, metal oxide varistors MOVs, gas discharge tube GDT, and a thermal fuse. It is designed to limit current and voltage in electronic applications.

The GSXF100A060S1-D3 is a 3-phase, 6-diode rectifier module designed for common use in many types of power conversion applications. It has a forward voltage rating of 100A, a reverse voltage of 600V, and a surge current of 1000V. It can handle up to 100A continuous current with a maximum reverse or surge current of 1000A. It is constructed with an aluminum base, tin-plated copper terminals, and an electrical isolation film. The rectifier bridge includes four diode bridges attached in series to the common bus line with the MOVs and GDTs connected to the output of each bridge.

The module has two main purposes: to protect the power supply and its connected loads from voltage transients and overvoltages, and to provide a fast response to surges or short-duration short-circuits. It also has other features designed for power conversion applications, such as surge suppression and over-temperature protection. In addition, the MOVs protect the output from transient overvoltages, while the thermal fuse provides over-temperature protection.

The rectifier bridge\'s main purpose is to convert AC power into DC power for use by electronics. When the AC supply voltage is applied, the bridge rectifies the AC input, creating a DC output. The rectifier bridge has a diode bridge, which is usually made up of four or six individual diode elements, which block current flow in one direction while allowing it to pass in the other direction. This allows the bridge to rectify the AC to DC. The diodes in the bridge also act as a form of protection against overcurrents and surges.

The MOVs and GDTs are used to protect against overvoltage. MOVs provide low-impedance protection against overvoltages. They limit the voltage by clamping it to a predetermined value. GDTs, on the other hand, are gas-filled tubes that provide the same protection as MOVs, but are designed to handle higher surge currents. Both MOVs and GDTs provide a fast response time to reduce the damage from transients.

The thermal fuse is designed to protect against over-temperature conditions. It will blow if the temperature rises above a certain level. This helps protect the power supply and any connected loads from damage due to excessive temperatures.

In conclusion, the GSXF100A060S1-D3 is a rectifier module that is designed for many types of power conversion applications. It can provide protection from voltage transients and overvoltages, while also providing surge suppression and over-temperature protection. The rectifier bridge, MOVs, GDTs, and thermal fuse are primary components which combine to help protect against various power conditions and keep the power supply and connected loads safe.

The specific data is subject to PDF, and the above content is for reference