GTCT37-551M-P10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas discharge tube arresters (GDT) are electronic components used to protect electrical equipment against overvoltages. GTCT37-551M-P10 is a GDT designed for protection of telecommunications and power distribution equipment. It is suitable for applications from 600 V to 11 kV.

GTCT37-551M-P10 is a non-linear device, composed of a gas tube arranged between two electrodes. The gas tube is filled with a combination of inert gases, such as nitrogen and argon, in specific proportions. At normal operating voltages, the gas tube behaves like an open circuit, allowing no current to flow through it. However, when the voltage across the gas tube increases to a certain level, a spark is created, producing an arc of electrons between the two electrodes. At this point, the gas tube acts like a closed circuit, conducting current and protecting the equipment from possible overvoltages.

The operation of GTCT37-551M-P10 is similar to other GDTs. The device consists of a stored energy source and an arrestor, both of which must be available for it to operate correctly. The stored energy source is typically a set of metal oxide varistors (MOVs) that can store energy and discharge it when needed. The MOVs also act as a resistor, limiting the current that can flow through the arrestor.

The arrestor is the main component of the GDT, and is composed of a gas-filled cavity between two electrodes. The gas inside the cavity is a combination of inert gases such as nitrogen and argon. When the voltage across the arrestor exceeds a certain level, a spark is created, which produces an arc of electrons between the electrodes. The electrons ionise the gas, turning it into a conductor and providing a path for the current. This current reduces the voltage to a safe level, protecting the equipment from damage.

GTCT37-551M-P10 has a wide range of applications, including protection for telecommunications, radio and television, power distribution networks, and data and signal lines. For telecommunications, it is used to protect against surge voltages in antenna systems or subscriber lines. For power distribution networks, it is used to protect against power surges and transient overvoltages in medium and high voltage networks. It is also suitable for data and signal lines, where it can be used in place of traditional lightning arrestors.

In summary, GTCT37-551M-P10 is a specialized, high-performance GDT used to protect electrical equipment from overvoltages. It is suitable for applications from 600 V to 11 kV, and can be used in a wide range of applications, from telecommunications to power distribution networks. Its operation is based on the principle of spark ionisation, which produces an arc of electrons between two electrodes, allowing current to flow and reducing the voltage to a safe level.

The specific data is subject to PDF, and the above content is for reference