Allicdata Part #: | 751-1273-5-ND |
Manufacturer Part#: |
H11A1 |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Vishay Semiconductor Opto Division |
Short Description: | OPTOISO 5.3KV TRANS W/BASE 6DIP |
More Detail: | Optoisolator Transistor with Base Output 5300Vrms ... |
DataSheet: | H11A1 Datasheet/PDF |
Quantity: | 1216 |
Output Type: | Transistor with Base |
Supplier Device Package: | 6-DIP |
Package / Case: | 6-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -55°C ~ 100°C |
Vce Saturation (Max): | 400mV |
Current - DC Forward (If) (Max): | 60mA |
Voltage - Forward (Vf) (Typ): | 1.1V |
Current - Output / Channel: | 50mA |
Voltage - Output (Max): | 70V |
Series: | -- |
Input Type: | DC |
Rise / Fall Time (Typ): | -- |
Turn On / Turn Off Time (Typ): | 3µs, 3µs |
Current Transfer Ratio (Max): | -- |
Current Transfer Ratio (Min): | 50% @ 10mA |
Voltage - Isolation: | 5300Vrms |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are a type of electronic component designed to isolate the input signal from the output signal with a set of photoelectric devices. H11A1 is one example of optoisolators. It is a Transistor, Photovoltaic Output optoisolator designed to provide a high degree of electrical isolation between two circuits with a photovoltaic device in between. By insulated the input signal from the output signals, H11A1 enhances the current limiting through a stable current sinking capability, provides unidirectional noise suppression, and keeps voltage spikes caused by inductive loads away from the controls.
The H11A1 consists of an infra-red emitting diode and a photovoltaic cell with a buffered amplifier in between. It operates over a wide ambient temperature range and withstands high transient energies between its input and output. It can not only shift voltage levels, but also provide noise immunity and low speed data transmission. H11A1 optoisolators are available in many standard SMD or through-hole packages for a variety of applications.
The working principle of the H11A1 can be broken down to two basic stages: the first stage includes a Luminous element which is the infrared emitter. The Luminous element emits an invisible infrared light towards a photocell which is located on the other side of the device, this infrared light is converted to electric current by the Photocell. This current is then amplified by the amplifier connected to the photocell and sent to the output.
In the second stage, the LED emits an infrared light beam that is directed to the opposite side of the Photodiode. When the light from the LED enters the Photodiode, it generates current and voltage, which is further amplified by circuitry after the photodiode. The amplified current will then be driven out through the output and allow the input signal to be sent to the output stage without any physical contact.
H11A1 optoisolators are designed mainly for industrial and commercial applications. Some of the key features of H11A1 optoisolators include: extremely high isolation voltage rating (up to 8000Vrms); wide-operating temperature range between -25°C to +85°C; higher input-current at +2mA, high noise immunity and low speed date transmission; the device provides a generous amount of microsecond time delays for power MOSFET switches, power relays and other switching applications; and surface mount device (SMD) packages for easy mounting onto PCBs.
H11A1 optoisolators are most commonly used in industrial and commercial applications as a means of providing electrical isolation and noise suppression in power control circuits. This isolation is provided by shifting the input signal to a different voltage level and driving the output load in a stable way. Additionally, the H11A1 optoisolator can provide high voltage isolation to ensure that there is no current leakage between the input and output. This helps maintain current and voltage stability in the circuit, while also protecting the output and input from surges and spikes of voltage.
Overall, H11A1 is a reliable, low-cost, high-performance optoisolator designed to provide efficient electrical isolation in various applications. It is specifically designed to provide isolation up to 8kVrms, wide temperature ranges, high speed data transmission, high current sinking capabilities, and low-cost SMD packages. Its features also make the H11A1 suitable for use in motor drives, telecoms, power relays, PLCs, LAN networks, and many other applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
H11A1-X001 | Vishay Semic... | 0.2 $ | 1000 | OPTOISO 5.3KV TRANS W/BAS... |
H11A1-X006 | Vishay Semic... | 0.2 $ | 1000 | OPTOISO 5.3KV TRANS W/BAS... |
H11A1-X009 | Vishay Semic... | 0.2 $ | 1000 | OPTOISO 5.3KV TRANS W/BAS... |
H11A1-X009T | Vishay Semic... | 0.22 $ | 1000 | OPTOISO 5.3KV TRANS W/BAS... |
H11A1M-V | Everlight El... | 0.25 $ | 1000 | OPTOISO 5KV TRANS W/BASE ... |
H11AA1-X001 | Vishay Semic... | 0.32 $ | 1000 | OPTOISO 5.3KV TRANS W/BAS... |
H11AA1-X007 | Vishay Semic... | 0.32 $ | 1000 | OPTOISO 5.3KV TRANS W/BAS... |
H11AA2S(TA)-V | Everlight El... | 0.33 $ | 1000 | OPTOISO 5KV TRANS W/BASE ... |
H11AA4S1(TA)-V | Everlight El... | 0.33 $ | 1000 | OPTOISO 5KV TRANS W/BASE ... |
H11AA4S(TA)-V | Everlight El... | 0.33 $ | 1000 | OPTOISO 5KV TRANS W/BASE ... |
H11AV1M | ON Semicondu... | -- | 490 | OPTOISO 4.17KV TRANS W/BA... |
H11A1X | Isocom Compo... | 0.41 $ | 928 | OPTOISO 5.3KV TRANS W/BAS... |
H11AA4SR2VM | ON Semicondu... | 0.25 $ | 1000 | OPTOISO 4.17KV TRANS W/BA... |
H11AV3X | Isocom Compo... | 0.41 $ | 525 | OPTOISO 5.3KV TRANS W/BAS... |
H11A1TVM | ON Semicondu... | 0.55 $ | 1000 | OPTOISO 4.17KV TRANS W/BA... |
H11AA1SR2VM | ON Semicondu... | -- | 480 | OPTOISO 4.17KV TRANS W/BA... |
H11A1VM | ON Semicondu... | 0.55 $ | 332 | OPTOISO 4.17KV TRANS W/BA... |
H11A1SR2VM | ON Semicondu... | 0.18 $ | 1000 | OPTOISO 4.17KV TRANS W/BA... |
H11AA4VM | ON Semicondu... | 0.67 $ | 282 | OPTOISO 4.17KV TRANS W/BA... |
H11AA1VM | ON Semicondu... | 0.69 $ | 339 | OPTOISO 4.17KV TRANS W/BA... |
H11AA1SVM | ON Semicondu... | 0.69 $ | 186 | OPTOISO 4.17KV TRANS W/BA... |
H11AV1AVM | ON Semicondu... | 0.71 $ | 574 | OPTOISO 4.17KV TRANS W/BA... |
H11AA4TVM | ON Semicondu... | 0.73 $ | 840 | OPTOISO 4.17KV TRANS W/BA... |
H11AA4SVM | ON Semicondu... | 0.73 $ | 276 | OPTOISO 4.17KV TRANS W/BA... |
H11AV1VM | ON Semicondu... | 0.75 $ | 990 | OPTOISO 4.17KV TRANS W/BA... |
H11AV1SR2M | ON Semicondu... | -- | 1000 | OPTOISO 4.17KV TRANS W/BA... |
H11AV1SR2VM | ON Semicondu... | 0.26 $ | 1000 | OPTOISO 4.17KV TRANS W/BA... |
H11AG1TVM | ON Semicondu... | 1.05 $ | 975 | OPTOISO 4.17KV TRANS W/BA... |
H11AA4SDM | ON Semicondu... | 0.34 $ | 1000 | OPTOISO 7.5KV TRANS W/BAS... |
H11AG1SM | ON Semicondu... | 1.09 $ | 294 | OPTOISO 4.17KV TRANS W/BA... |
H11AA1-X009T | Vishay Semic... | -- | 1000 | OPTOISO 5.3KV TRANS W/BAS... |
H11AA3X | Isocom Compo... | 0.62 $ | 86 | OPTOISO 5.3KV TRANS W/BAS... |
H11AA2S1(TA)-V | Everlight El... | 0.0 $ | 1000 | OPTOISO 5KV TRANS W/BASE ... |
H11A1-X017 | Vishay Semic... | 0.0 $ | 1000 | OPTOISO 5.3KV TRANS W/BAS... |
H11A1-X007 | Vishay Semic... | 0.0 $ | 1000 | OPTOISO 5.3KV TRANS W/BAS... |
H11A617B300W | ON Semicondu... | 0.0 $ | 1000 | OPTOISO 5.3KV TRANSISTOR ... |
H11A617D | ON Semicondu... | 0.0 $ | 1000 | OPTOISO 5.3KV TRANSISTOR ... |
H11A617CW | ON Semicondu... | 0.0 $ | 1000 | OPTOISO 5.3KV TRANSISTOR ... |
H11A617D300 | ON Semicondu... | 0.0 $ | 1000 | OPTOISO 5.3KV TRANSISTOR ... |
H11A617D3S | ON Semicondu... | 0.0 $ | 1000 | OPTOISO 5.3KV TRANSISTOR ... |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...