H11AA2SVM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Opto-isolators, also known as opto-couplers or opto-coupling devices, are used to transmit electrical signals between two electrically isolated portions of a circuit. The device consists of a light source such as an LED and a photodetector, such as a phototransistor, and provides electrical isolation between two circuit elements. This isolation prevents damage to either side of the circuit, as well as prevents false signals from entering the system. In some cases, opto-isolators are used for digital signal multiplexing.

H11AA2SVM is an opto-isolator of the transistor, photovoltaic output type. The circuit consists of an infrared (IR) LED and photodetector, which are optically coupled in close proximity to each other so that the LED light output can be received by the photodetector. The LED is used to emit an IR signal, which is received by the photodetector. The photodetector output is then used to control an electromechanical device, such as a relay or a solenoid.

The key features of H11AA2SVM opto-isolator are its high insulation voltage (2.5 kV peak) and low output current (1 mA). The device is also a bipolar device, meaning that it can be used to control both DC and AC signals. Additionally, it has a dielectric strength of 10 GΩ (minimum) and a CTR (Current Transfer Ratio) of up to 40%. This makes it highly suitable for use in various applications requiring electrical isolation, such as in medical imaging equipment, automotive electronics, industrial control systems, and instrumentation.

The working principle of H11AA2SVM opto-isolator is straightforward. When the LED is energized, it emits an IR signal. This signal is then captured by the photodetector and is converted into a voltage, which is then used to control the device connected to the output of the opto-isolator. Depending on the power output of the LED and the responsivity of the photodetector, the output voltage can be either AC or DC.

H11AA2SVM opto-isolator has high insulation voltage and low current output, and is thus suitable for a variety of applications, such as controlling relays and solenoids, isolating signals, and providing electrical isolation between circuits. Its bipolar capability, high dielectric strength, and wide range of CTRs make it a preferred choice for many engineers seeking an opto-isolator for their electrical isolation requirements.

The specific data is subject to PDF, and the above content is for reference