H11AG3W

Output Type:	Transistor with Base
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.400", 10.16mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 100°C
Vce Saturation (Max):	400mV
Current - DC Forward (If) (Max):	50mA
Voltage - Forward (Vf) (Typ):	1.5V (Max)
Current - Output / Channel:	50mA
Voltage - Output (Max):	30V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	--
Turn On / Turn Off Time (Typ):	5µs, 5µs
Current Transfer Ratio (Max):	--
Current Transfer Ratio (Min):	20% @ 1mA
Voltage - Isolation:	5300Vrms
Number of Channels:	1
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators -- Transistor, Photovoltaic OutputOptoisolators are electronic devices that provide electrical isolation between two circuits. The primary purpose of optoisolators is to protect one circuit from any damage that could occur from a fault or malfunction in the other circuit. Although an optoisolator may be used to transfer signals between circuits, their primary function lies in isolating these two circuits from each other.The H11AG3W optoisolator is a 6-terminal, high-voltage transistor with a photovoltaic output. It is capable of transmitting both AC and DC signals with high speed over long distances with minimal interference. This device is packaged with an industry standard 4-pin connector and has a wide range of operating temperatures (-55 to + 150 degrees Celsius).The H11AG3W optoisolator works by using the photovoltaic effect to convert light into electrical current. This is done by using a light-emitting diode (LED) as the light source and a photoconduct it ve material, typically a silicon photodiode, as the photosensitive element. When light from the LED strikes the photodiode, electrons are emitted and form a photocurrent. This photocurrent is then amplified by the transistor in the optoisolator. The amplification process causes a voltage swing from one state to the other, allowing the circuit to control the on or off state of the signal. The H11AG3W optoisolator is used in many applications because of its high speed and long distance capabilities. It can be used in automotive electronics for control and communication between components, such as in engine management systems, transmission control systems, and airbag control. It can also be found in consumer devices, such as televisions, DVD players, and video gaming consoles. Additionally, the H11AG3W is used in aerospace and defense applications, where electrical isolation and noise reduction is necessary for reliable operation.Overall, the H11AG3W optoisolator is a versatile and reliable electronic device that is used in a variety of applications to provide electrical isolation and signal transmission. The device can transmit both AC and DC signals with high speed over long distances with minimal interference, and offers protection from the risks associated with circuit faults and malfunctions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description