H11AV1A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic devices that create an isolation barrier between two circuits. They are used to protect sensitive parts of a circuit from being overloaded or affected by electromagnetic interference. The H11AV1A optoisolator is a transistor, photovoltaic output optical coupler.

The H11AV1A optoisolator consists of an infrared-emitting diode (IRED) and a photovoltaic transistor output stage. The IRED emits a beam of infrared light, which is detected by a photosensitive silicon detector inside the optical coupler. This detector then generates a voltage, which switches on the transistor output. This type of optoisolator provides high noise immunity, as the IRED and detector are both optically isolated from the output. It also provides high switching speed and a guaranteed minimum off-state current.

The H11AV1A can be used to provide electrical isolation between two circuits that are exposed to electrical or electronic noise, or to control high voltages and currents with low voltages and currents. This optoisolator can be used in many applications, including motor control, switch control, logic level conversion, power switching, and signal conditioning.

The operating principle of the H11AV1A optoisolator is simple. When the input voltage is applied to the IRED, it emits infrared light which is detected by the detector. This generates a voltage waveform, which switches on the output transistor. The output voltage and current are then controlled by the input voltage. The output voltage can be adjusted by adding or removing resistors, which control the amount of infrared light detected by the detector. In addition, the output current can be adjusted by setting the value of the current limiting resistor.

The H11AV1A optoisolator is a reliable and safe device for providing electrical isolation in applications where noise immunity and high switching speed are required. It is easy to use and can provide reliable electrical isolation with low cost and effort. The device is suitable for applications in motor control, switch control, logic level conversion, power switching, and signal conditioning.

The specific data is subject to PDF, and the above content is for reference