H11F2M

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Number of Channels:	1
Voltage - Isolation:	7500Vpk
Current Transfer Ratio (Min):	--
Current Transfer Ratio (Max):	--
Turn On / Turn Off Time (Typ):	45µs, 45µs (Max)
Rise / Fall Time (Typ):	--
Input Type:	DC
Output Type:	MOSFET
Voltage - Output (Max):	30V
Current - Output / Channel:	--
Voltage - Forward (Vf) (Typ):	1.3V
Current - DC Forward (If) (Max):	60mA
Vce Saturation (Max):	--
Operating Temperature:	-40°C ~ 100°C
Mounting Type:	Through Hole
Package / Case:	6-DIP (0.300", 7.62mm)
Supplier Device Package:	6-DIP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output

The H11F2M optoisolator is a solid-state device used to electrically isolate two parts of a circuit. It is sometimes referred to as an opto-isolator or optoelectronic isolator. This device is relatively small, measuring only 15mm by 10mm, and is usually housed in a plastic package.This device consists of an infrared LED and an NPN phototransistor, both of which are hermetically sealed in the package. The LED provides the light source for the phototransistor, causing current to flow when it is activated. The transistor acts as a switch, which is then used to control another part of the circuit.The H11F2M can be used in a variety of applications, such as medical devices, communication systems, transportation systems, industrial controls, and any other applications where electrical isolation is needed. The device is typically used in isolated power circuits, where one section of the circuit is electrically isolated from the other.The device can also be used for safety applications, as it can provide protection from electrically hazardous currents. The device is also useful for reducing power loss and improving noise filter in circuits.The working principle of the H11F2M is fairly simple. When the LED is activated, it emits light which is detected by the phototransistor. This light causes current to flow through the transistor, which in turn activates the switch and allows the current to flow from one side of the circuit to the other.The device is also capable of working in a wide variety of temperatures, ranging from -55°C to +100°C. This makes the H11F2M suitable for use in a variety of environments, both indoors and outdoors.The H11F2M is a cost-effective, efficient device for providing electrical isolation and safety in a variety of different applications. Its small size and wide operational range make it an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description