H11F3300

Output Type:	MOSFET
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 100°C
Vce Saturation (Max):	--
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.3V
Current - Output / Channel:	--
Voltage - Output (Max):	15V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	--
Turn On / Turn Off Time (Typ):	25µs, 25µs (Max)
Current Transfer Ratio (Max):	--
Current Transfer Ratio (Min):	--
Voltage - Isolation:	5300Vrms
Number of Channels:	1
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Optoisolators are semiconductor devices designed to provide electrical isolation between one or more input and output circuits. They work using light emitting diodes (LEDs) and photodetectors in the form of either photovoltaic or transistor output devices to convert electrical signals into optical signals and vice versa. The H11F3300 is an optoisolator specifically designed to provide electrical isolation between a high-power input circuit and a low-power output circuit.

Application Field

The H11F3300 optoisolator can be used to provide electrical isolation in a range of applications such as:

• Digital input and output systems
• Analog signal transmission and reception
• Microcontroller systems
• Remote control systems
• Interfacing with different types of sensors

For digital systems, the optoisolator can be used to isolate the digital logic from any ground loops or other spurious signals that may be present in the system. This ensures that the correct logic signal is transmitted to the output device.

Working Principle

The H11F3300 optoisolator is a 4-pin optocoupler that comprises of both an LED and a photodiode in a single package. When an electrical signal is applied to the input pin, the LED inside the package emits light which is picked up by the photodiode. The photodiode then converts the optical signal into an electrical signal which is sent to the output pin.The electrical isolation between the input and output pins of the optoisolator is provided by the LED and photodiode. When the LED is turned on, the photons generated by the LED provide the electrical insulation, which prevents any electric current from passing between the pins. Similarly, when the photodiode is turned on it prevents any electrical current from passing through the photodiode due to the photoelectric effect.The advantage of using an optocoupler is that it can provide high speed switching, which is not possible with coil-based solutions. Additionally, the optocoupler also eliminates the need for using a transformer for isolation.

Conclusion

The H11F3300 optoisolator is a transistor, photovoltaic output optoisolator designed to provide electrical isolation between the input and output of a system. It can be used in a variety of applications such as digital input and output systems, analog signal transmission and reception, microcontroller systems, remote control systems and interfacing with different types of sensors. The optocoupler works by using an LED and photodiode in a single package to convert electrical signals into optical signals and vice versa, providing the necessary electrical isolation. The optocoupler eliminates the need for using a transformer for isolation and can provide high speed switching.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description