H2AAT-10105-N4

Jumper Wires, Pre-Crimped Leads – H2AAT-10105-N4 Application Field and Working Principle

Introduction

H2AAT-10105-N4 is a type of jumper wires pre-crimped leads, also known as Bent Pin Test Leads. It is designed mainly for use in electronic circuits, which utilizes a single pair of insulated Bent Pins as the contact points. The bent wire leads have an overall length of 10mm, a maximum diameter of 8mm and a minimum thickness of 1mm.

Application Field

H2AAT-10105-N4 is usually used in electronic devices in order to reduce the risk of overload or accidental shocks. It can also be used for high-speed data transfer and signal transmission between two components. Generally, it is suitable for measuring circuits or connecting other electronic components.

Working Principle

The working principle of H2AAT-10105-N4 can be summarized as follows. First, the bent pins on the jumper wires contain a thin wire which touches the contact parts when two ends of the pins are pressed against each other. This generates an electric connection between the two components in the circuit, allowing the transfer of energy from one part to the other. Additionally, the insulated cables also prevent the short circuiting of these components.

Secondly, the current passes from the tip of the bent pins to the contact points in the circuit, which generates the required voltage. This allows the components to interconnect quickly and accurately, resulting in improved electrical operation.

Conclusion

The H2AAT-10105-N4 is a type of jumper wires pre-crimped leads, which is mainly used for measuring circuits or connecting other electronic components. Its working principle is based on a thin wire which touches the contact points when two ends of the pins are pressed against each other. This generates an electric connection between the two components in the circuit, allowing the transfer of energy from one part to the other. The insulated cables also prevent the short circuiting of these components.