H2ABG-10102-W4

Series:	DF3
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Pin to Socket
Moisture Sensitivity Level (MSL):	--
Length:	2.00" (50.80mm)
Wire Gauge:	24 AWG
Contact Finish:	Gold
Color:	White
Contact Finish Thickness:	--
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

H2ABG-10102-W4 is a type of jumper wire, which is an electrical connector that has two conductors of the same gauge connected to each other. It is typically used to make temporary electrical connections in devices and applications, such as diagnostic tests or debugging. It is also used in prototyping circuits and to link components in circuit boards. Jumper wires, also known as jumper cables, jumpers, and du-ponts, are most commonly found in the form of pre-made jumper pins or terminals or as individual insulated wires with one or two connectors on each end. The connectors can vary widely, depending on application and requirements. The most common type of connector used is a crimp pin or collar, which is available in various sizes and colors. Other popular connector types include banana plugs, spring clips, and alligator clips.

Pre-Crimped Leads

H2ABG-10102-W4 is a type of pre-crimped lead, which is an electrical wire that has been pre-terminated at one end with a connector. It is designed for use in applications or devices where the ends of a pair of electronic wires or components must be attached permanently or semi-permanently, such as in printed circuit boards (PCBs). It is also used to easily and quickly connect components in prototype builds.Pre-crimped leads are available in many different sizes, materials, plating, and insulation types, depending on the application and requirements. The most common types of leads are those with crimp pins or terminals at either end, which are usually labeled according to their size and gauge. Other varieties can have different connectors, such as terminals, clips, spade terminals, and pin terminals. To use pre-crimped leads, the connector on each end must be connected properly. This can be done by using a crimp tool, which is designed to securely crimp the connector and ensure a good connection. Once the connection is made, the lead is ready to be installed in the application or device, and the connection can be tested using an ohmmeter or similar device. In summary, H2ABG-10102-W4 is a type of jumper wire and pre-crimped lead that is useful in applications where quick and reliable connections need to be made. It can be used to easily and quickly connect components in circuit boards or prototype builds, and the connectors on each end can be securely crimped using a crimp tool.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description