H2BBG-10104-B4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper Wires are a type of electrical wire used to connect two points. Most jumper wires have a flat or ring terminal at the end, which allows them to be attached to a board, panel, or lug. This size of wire is very important when creating connections within electrical systems. The length, gauge, and type of conductor determines a jumper wire\'s use.

The H2BBG-10104-B4 is a jumper wire available in lengths of up to 30 cm. It is a flat wire composed of a copper conductor with a PVC insulation. The conductor has a cross-sectional area of 2.5 mm² and is rated at 20 AWG and 10 A. The insulation is 1.6 mm thick and offers protection from both mechanical and electrical hazards. The terminals are gold-plated for an improved bond.

Application Field

The H2BBG-10104-B4 jumper wire is suitable for use in a variety of electrical systems and components. These can include automotive, industrial, and appliance systems, as well as medical devices. It is also suitable for use in any low-voltage electrical circuit up to 1 A. Due to its safety rating, it is also suitable for use in hazardous areas where a higher safety rating may be needed.

Working Principle

The working principle of a H2BBG-10104-B4 jumper wire is simple. The ends of the wire are connected to the desired points using the terminals, forming a connection that allows electricity to flow. The flat wire ensures an adequate connection with minimal interference from other signals. The insulation on the wire helps protect it from electrical hazards and also provides a protective barrier between the body of the wire and any electrical components or circuits connected to it.

Pre-Crimped Leads

Pre-Crimped Leads are a type of cable that is made up of one or more wires with pre-crimped terminals. This type of cable is commonly used to make more permanent connections and to secure wires and components in place. Pre-crimped leads also reduce assembly time and cost when creating electrical systems. The H2BBG-10104-B4 is one such pre-crimp lead.

The H2BBG-10104-B4 is a pre-crimped lead composed of a copper conductor with a PVC insulation. The conductor has a cross-sectional area of 2.5 mm² and is rated at 20 AWG and 10 A. The insulation is 1.6 mm thick and offers protection from both mechanical and electrical hazards. The terminals are gold-plated for an improved bond.

Application Field

The H2BBG-10104-B4 pre-crimped lead is suitable for use in a variety of electrical systems and components. These can include automotive, industrial, and appliance systems, as well as medical devices. It is also suitable for use in any low-voltage electrical circuit up to 1 A. Due to its safety rating, it is also suitable for use in hazardous areas where a higher safety rating may be needed.

Working Principle

The working principle of a H2BBG-10104-B4 pre-crimped lead is simple. The terminal is already crimped to the wire on one end, allowing it to be quickly connected to electrical components and circuits. The insulation on the wire helps protect it from electrical hazards and also provides a protective barrier between the body of the wire and any electrical components or circuits connected to it. The flat wire ensures an adequate connection with minimal interference from other signals.

The specific data is subject to PDF, and the above content is for reference