H2BBT-10104-S6

Jumper Wires

Jumper wires are small wiring components that provide a path for electricity to flow between two points in an electrical circuit. They are generally made of two conductive strands, one to provide the electrical current and one to ground or act as a return path. The size of the jumper wires depends on the current that will be passed through them. Generally, jumper wires can be used in almost any application.

Pre-Crimped Leads

Pre-crimped leads are designed to create a connection between two points in a circuit. The lead construction typically involves a pre-crimped metal barrel attached to a wire. This lead is then already wired to a connector or device and can be easily plugged into a circuit board to make a connection without additional wiring.

H2BBT-10104-S6 Application Field and Working Principle

The H2BBT-10104-S6 is a reliable and cost-effective jumper wire. This type of jumper wire is suitable for a wide range of applications. It is primarily used as a connection device in communication, medical, automotive, military, and consumer electronics. It can also be used in a range of automotive diagnostic equipment, LED lighting circuits, and power supplies.

The working principle of the H2BBT-10104-S6 is simple. It consists of a cable with two conductors that are insulated by PVC material. The conductors are constructed of stranded copper wire for improved flexibility and electrical performance. The conductors are also tin-plated for superior corrosion resistance and decreased electrical resistance. The insulation layer provides abrasion and vibration resistance, while the internal core is jacketed with a crimped metal polarity sleeve to ensure proper polarity connection.

The H2BBT-10104-S6 also includes an internal strain relief sleeve which provides additional support and stability to the connection. This jumper wire has a current rating of 5.5A for continuous use and up to 12A if used for intermittent operation. It is rated to -40°C to +105°C and is UL252 approved for use in both wet and dry locations.

Conclusion

The H2BBT-10104-S6 is a reliable and cost-effective jumper wire, suitable for a wide range of applications. Its two conductors are made of copper strands for improved flexibility and insulation and are tin-plated for improved corrosion resistance. In addition, it also includes an internal strain relief sleeve for increased stability and a current rating of up to 12A for intermittent operation. It is UL252 approved and is suitable for use in both wet and dry locations.