H2BXT-10106-A8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are a type of electrical connector used in circuit boards to facilitate the connection of wires. Jumper wires are usually composed of metal or plastic and have a conductive conductor with a wire termination on either side. They are used to connect two points in a circuit, for example a circuit board connector or an LED module.

Jumper wires are used for connecting two points that cannot be accessed easily by other types of connectors such as soldering wires. It is also used for troubleshooting, testing, prototyping and deleting the electrical failures. The most common types of connectors for jumper wires are male and female, with the male end having a higher resistance rating.

Jumper wires vary in length and width, with the most common lengths ranging from 0.315 to 0.750 inch thick. Jumper wires come in various colors, with red and black being the most common. Jumper wires are often referred to as “crimp wires” as they require special tools for crimping it securely. It is important to make sure that the jumper wire has an adequate insulation rating and a correct wire gauge for the application. Jumper wires are easy to use and very reliable.

Pre-Crimped Leads

Pre-crimped leads are also known as pre-assembled leads, which are a type of electrical component or connector used in circuit boards to facilitate the connection of wires. Pre-crimped leads are composed of a metal conductor and a wire insulation with a terminal on one end and a crimp on the other end. They are available in various lengths and gauges ranging from 0.050 inch to 0.625 inch. Pre-crimped leads are commonly used to connect get components, such as resistors, coils, buttons and LEDs in circuit boards.

Pre-crimped leads are a great way to save time during prototyping and assembly, as the connection to the circuit board doesn’t require any soldering. Pre-crimped leads also provide a reliable connection and require less space than other types of connectors. It is important to make sure that the crimp is of the correct gauge and that there is sufficient insulation around the wire.

H2BXT-10106-A8 application field and working principle

H2BXT-10106-A8 is a type of jumper wire optimized for use in electronic equipment, robotics and other applications where a reliable connection is needed between two points. This jumper wire is designed with a high-temperature, flexible, insulated copper conductor, which ensures a secure, low-resistance, and durable connection.

The working principle of this jumper wire is simple: it is the connection between two points that allows the current to flow from one end to the other. This connection is made through the contact between the conductive portion of the wire, which is copper, and the insulating portion, usually a plastic material. This connection is not affected by external factors such as vibration or heat, making it ideal for use in applications with sudden changes in temperature or in environments with high levels of vibration.

The H2BXT-10106-A8 has a maximum voltage rating of 600 volts and a temperature range of -40 to +105°C. This jumper wire is easy to use and can be installed quickly without the need for special tools. Its pre-crimped design also ensures a secure and reliable connection which can withstand long-term use.

The specific data is subject to PDF, and the above content is for reference