H3ABG-10112-S4

Jumper Wires

A jumper wire is a type of electrical wire used to make a quick and temporary connection between two points. The term \'jumper wire\' is also often used interchangeably with the term \'jumper cables\'. Jumper wires are used in many low-level electrical systems to bridge gaps. They can range from very basic, single-wire jumper wires to multi-conductor cables which usually have an insulation jacket.

Jumper wires are commonly used in prototyping printed circuit boards (PCB) and applications that involve the use of test equipment such as oscilloscopes and multimeters. They are also used to bridge short circuits and to bypass faulty components, allowing the equipment to run again until the component can be replaced.

The general construction of a jumper wire includes an insulated copper wire, which is usually either solid or stranded, and an insulated connector on one or both ends. The insulation can range from simple PVC coating to high-performance coatings, such as Teflon, that can withstand higher temperatures and provide greater electrical performance.

Pre-Crimped Leads

Pre-crimped leads are specialized electrical wires with a connector that is pre-attached to one end. These wires are often used in high-reliability applications, such as in aerospace and medical equipment, where a reliable electrical connection is essential. In many cases, a crimped electrical connection is the only viable option due to the high temperature, high pressure, or space limitations of the application.

The most common types of pre-crimped leads are standard contactor leads, which are used in a variety of applications. The core wire is either solid or stranded copper, and the insulation is a high-performance PVC or Teflon jacket. The contactor is usually a male crimp pin, but other types are also available. The connector is typically crimped onto the wire and assembled with a compression nut, heat shrink, or similar method to ensure a reliable electrical connection.

Pre-crimped leads are easy to use and provide a reliable connection for a variety of applications. They are much faster and easier to install than traditional screw-on connectors, and the connection is more secure and reliable than a soldered connection. For these reasons, pre-crimped leads are becoming more popular and widely used in many applications.

H3ABG-10112-S4 Application Field and Working Principle

The H3ABG-10112-S4 is a jumper wire set from H3ABG, a leading manufacturer of high-quality electrical components. This jumper wires set is designed for high-reliability applications, such as those commonly found in aerospace, automotive, and military equipment.

The H3ABG-10112-S4 jumper wire set consists of four double-insulated jumper wires with pre-crimped connectors. Each wire is 16-gauge, double-insulated, and features an overall diameter of 0.3mm. The connectors are made from stainless steel and designed to withstand temperatures up to 450 degrees Celsius.

This jumper wire set is designed to provide a secure, reliable connection in high-reliability applications. The double-insulated wires ensure that any voltage applied to the wire is not conducted to the load or equipment. Additionally, the pre-crimped connectors ensure that the connection is air- and water-tight, meaning it can withstand waves of pressure or sudden drops in temperature.

The H3ABG-10112-S4 jumper wires are designed for high-performance applications and are perfect for use in aerospace, automotive, and military applications. They provide a reliable connection in high-temperature, high-pressure, or low-space environments, making them an excellent choice for any application where a secure connection is required.