H3ABT-10102-Y6

Series:	DF11
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Pin to Socket
Moisture Sensitivity Level (MSL):	--
Length:	2.00" (50.80mm)
Wire Gauge:	26 AWG
Contact Finish:	Tin
Color:	Yellow
Contact Finish Thickness:	--
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are a simple yet effective way to connect two points of electronic communication. Using jumper wires, a signal or power can be transferred from one point to another without the need for soldering. The popularity of jumper wires comes from their ease of use and affordability. They are perfect for quickly prototyping small circuits.At their core, jumper wires are essentially small insulated wires with two ends that can be used to bridge a connection between multiple points. On one end of the wire, there is typically a metal skirt built into the plastic insulation. This skirt is specifically designed to help secure the wire in place while providing strain relief to avoid any damage. The other side of the wire can be equipped with a variety of termination types, including tiny copper tails which help hold the wire in place.

Pre-Crimped Leads

Pre-crimped leads are soldered wires that are already crimped on at least one end. They are typically used in applications where standard jumper wires would be too bulky or hard to install. Crimped leads offer higher reliability and better contact between the two end points compared to jumper wires or simple soldered wires.Crimp leads look very similar to a jumper wire that has been pre-crimped on one end. They usually come in an array of colors to help with circuit identification. In most cases, the colors of the wires in the lead have no significance or meaning, and are rather used to keep track of the various branches of communication.

H3ABT-10102-Y6 application field and working principle

The H3ABT-10102-Y6 is a jumper wire that is pre-crimped and uses coated copper terminals and ends for superior stress relief and contact integrity. This wire is used primarily in industrial and automated control applications and has been designed to provide a reliable connection with minimal current flow.The H3ABT-10102-Y6 is a multi-stranded copper wire which is insulated with an abrasion-resistant jacket that is UL, CSA, and CE approved. This wire is flexible enough to fit into tight spaces and can safely withstand extreme temperatures ranging from -40°C to +85°C. It has an operating voltage of 600VAC and an insulation resistance of 10M Ohms/km.The H3ABT-10102-Y6 wire contains 2+1 strands of quality copper wires that are wrapped around a single insulated core. This core is then sealed with a code-coded insulation sleeve that further limits contact with other current-carrying points for enhanced safety.The terminals of the H3ABT-10102-Y6 are all pre-crimped and tinned to ensure low contact resistance while avoiding oxidation. This pre-crimped termination with coated copper terminals is especially useful in applications where extra strain relief is required.In summary, the H3ABT-10102-Y6 is a reliable and highly efficient jumper wire with pre-crimped terminals, coated copper ends, and insulation sleeve for enhanced safety and reliability. It is suitable for use in commercial, industrial, and automated control applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description