H3AXG-10110-R6

Series:	DF11
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Pin to Cable (Round)
Moisture Sensitivity Level (MSL):	--
Length:	10.0" (254.0mm)
Wire Gauge:	26 AWG
Contact Finish:	Gold
Color:	Red
Contact Finish Thickness:	--
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires (aka header and jumper wires) are electrical wires that are used to link two points together. They are typically used to quickly connect components in a circuit or a prototype. Jumper wires are mainly used in breadboard protoboards for testing, but can also be used in more complex circuits or for production runs.Jumper wires can be made up of any type of conductor, which usually consists of stranded wire or solid tiny, thin trees of conductor. The conductors are often insulated in a plastic or rubber sheath to provide electrical insulation and strain relief. Jumper wires come in various styles such as male and female ends, as well as round and flat wire designs. They can be produced with custom specs such as number of pins, length, color, and more.

Pre-Crimped Leads

Pre-crimped leads are electrical cables with pre-formed crimps, completed with a strain relief sleeve at one end of each cable. These easy-to-assemble connections are commonly used in electronics manufacturing for their dependability and convenience. Pre-crimped leads are available in two types - soldered and unsoldered. Soldered leads have a pre-soldered connection on one end that makes installation easier and stronger than a crimped connection. Unsoldered preconned leads make it possible to connect a device without any soldering. Pre-crimped leads are often used in commercial businesses such as automotive and aerospace industries, to reduce the time needed to assemble circuits and connections.

H3AXG-10110-R6 Application Field and Working Principle

H3AXG-10110-R6 is a type of jumper wire for the breadboard protoboard, which is an ideal solution for rapid prototyping. It is designed as a complete assembly, containing an insulated 10-pin male header and five 10-inch jumper wires that are pre-crimped and ready for quick assembly. The H3AXG-10110-R6 is designed with a universal fit to fit all major electrical components, including terminal blocks, connector housings, and more. The header and wire configuration provides flexibility in making the connections. The header is designed to be connected to the breakout board, and the wires are pre-crimped with the correct termination for quick assembly on the printed circuit board (PCB). The working principle of the H3AXG-10110-R6 is simple. The header is connected to the breakout board, and the wires are connected to the circuit board. Once the connections are completed, the header and jumper wires will create a complete electrical circuit. The circuit can then be tested for reliability and performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description