H3AXT-10108-N8

Series:	DF11
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Pin to Cable (Round)
Moisture Sensitivity Level (MSL):	--
Length:	8.00" (203.20mm)
Wire Gauge:	28 AWG
Contact Finish:	Tin
Color:	Brown
Contact Finish Thickness:	--
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper WiresJumper wires are one of the most common connectors available today and are defined as an insulated or uninsulated electrical wire that may be solid core or stranded, depending on the application. The most common type of Jumper Wire is the H3AX T-10108-N8, which is an 8-pin jumper wire for use in a variety of electrical circuits and applications.Jumper wires are typically used to bridge two points in a circuit, enabling connections to be quickly and easily made without having to solder or use more complex wiring methods. Jumper wires can be used for creating a connection in a variety of scenarios, including prototyping a design, troubleshooting an existing circuit or circuit board, and providing circuit isolation.The H3AX T-10108-N8 jumper wire, for instance, is a versatile and reliable way to jump between two points on a circuit board in a short amount of time. It has 8-inch long, 28-AWG ( 0.37 mm2) insulated wire with an 8-pin connector that fits into a standard 0.125” male header. The connector and wire are rated to up to 9A and the individual wires are housed in a tough fiberglass reinforced polychloroprene insulation, protecting against thermal, abrasion, and mechanical stress. Pre-Crimped LeadsPre-crimped leads are also commonly used in various applications and tend to involve more intricate wiring methods. Pre-crimped leads are designed to be connected to electrical devices and are fitted with a connector that locks into a circuit board, allowing the conductor to be used without any modification.As with the H3AX T-10108-N8 jumper wire, the Pre-Crimped Lead is also made up of 28-AWG (0.37 mm2) wire, but instead of a standard 8-pin connector it is outfitted with a crimped-on connector that allows for secure connections. This connector typically has two or more pins that must fit correctly into the circuit board when making a connection. The Pre-Crimped Lead also has a major advantage over the H3AX T-10108-N8 jumper wire in terms of versatility. While both connectors are 8-inch long, the Pre-Crimped Lead can be customised with a variety of different connectors, allowing it to be used in a variety of applications.Working PrincipleThe working principle of the H3AX T-10108-N8 jumper wire and Pre-Crimped Lead is similar in that they both rely on a connection between two devices. In the case of the H3AX T-10108-N8 jumper wire, the connection is made through the 8-pin connector that fits into a standard 0.125” male header. This allows the jumper wire to bridge two points without having to use more complex methods such as soldering.In the case of the Pre-Crimped Lead, the connection is made through the two or more pins that must fit correctly into the circuit board when making a connection. This tight connection allows for a secure connection and is typically more reliable than a jumper wire. Both connectors have their advantages and disadvantages and the choice between them depends on the application in which they are being used. Generally speaking, the H3AX T-10108-N8 jumper wire is better suited for applications where a quick and easy connection is required, while the pre-crimped lead is better suited for applications where a strong connection and reliability is required.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description