H3AXT-10110-A6

Series:	DF11
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Pin to Cable (Round)
Moisture Sensitivity Level (MSL):	--
Length:	10.0" (254.0mm)
Wire Gauge:	26 AWG
Contact Finish:	Tin
Color:	Orange
Contact Finish Thickness:	--
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires, also known as jumper cables, are short electrical wires used to bridge two points on a circuit board. They are frequently used with microcontroller boards and FPGAs (field-programmable gate arrays) to prototype and test hardware and software designs. Jumper wires are usually two-ply, with one lead typically having the same color as the other. Typically, the red lead is usually the positive lead, while the black lead is the negative lead.Jumper wires come in different lengths and sizes. The size of the jumper wire typically depends on the size of the circuit boards it is connecting. Longer jumper wires are generally used for larger boards, while shorter ones are used for smaller boards.

Pre-Crimped Leads

Pre-Crimped leads are also known as crimped wires and are used mainly to connect components on a circuit board. They are often used in prototyping and testing of circuit boards. Pre-Crimped leads are typically made from copper and stainless steel and are available in standard lengths.The key feature of pre-crimped leads is that they are already crimped into a secure connection by a specialized factory during manufacturing, thus eliminating the need for soldering at the connection point. This has the added advantage of eliminating the risk of shorting and making the connection of components to the circuit board easier to install.

H3AXT-10110-A6 Application Field and Working Principle

H3AXT-10110-A6 is a type of jumper wire made from copper and stainless steel. The standard length of these wires is 10mm. They are used in prototyping and testing of circuit boards, as they can be easily and quickly connected to other components.The H3AXT-10110-A6 also offers protection against corrosion and can be easily removed from the circuit board if needed. The connection is firm and secure, and it can be used to bridge short distances between components.As for the working principle of the H3AXT-10110-A6, it is as simple as inserting and locking the wire into place on the board. This is done by using a crimping tool which ensures a secure fit. The connection is then tested to check the quality of the connection. The wire can be easily disconnected again if needed.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description