H3BBT-10112-R6

Series:	DF11
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Socket to Socket
Moisture Sensitivity Level (MSL):	--
Length:	12.0" (304.8mm)
Wire Gauge:	26 AWG
Contact Finish:	Tin
Color:	Red
Contact Finish Thickness:	--
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are the most common type of interconnect solution used to provide connectivity between two points on a circuit board. These wires are typically either routed through existing component pins or routed across pre-drilled holes, or vias. Jumper wire sets are often used to create custom circuits within a prototype or to repair existing circuits. Jumper wires are usually composed of two or more insulated conductors secured together with a strain relief coating.H3BBT-10112-R6 is an example of jumper wire specifically designed for connection to printed circuit boards. This type of jumber wire is constructed with 26awg UL1007 hookup wire having a 0.01" inner diameter and is terminated with cooper and tin-plated contacts. The contacts are designed to provide a reliable connection between the PCB and the wires preventing shorts or arcs. This jumper wire can be used to replace or repair wires that have become damaged or for connecting test points to the main circuit.

Pre-Crimped Leads

Pre-crimped leads are electrical wires that have been pre-crimped to one of a variety of connector types. These leads provide a reliable and cost-effective way to establish a strong connection between a source of power and a receiving device. Pre-crimped leads are commonly used in applications that require power to be delivered to multiple locations on a circuit board, as the leads can be soldered into place and then powered on. H3BBT-10112-R6 is an example of a pre-crimped lead specifically designed for connection to printed circuit boards. This type of pre-crimped lead is constructed of 26awg UL1007 hookup wire and comes with a strain relief coating that ensures the conductor will remain in place without coming loose during soldering. It is then sized to fit seamlessly into standard through-hole location on a circuit board. The contacts are designed to provide a reliable connection between the PCB and the wires, preventing shorts or arcs. This pre-crimped lead type can be used to replace or repair wires that have become damaged or for connecting test points to the main circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description