H3BXT-10104-Y8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are essential for connecting and sequencing electrical components on circuit boards or in embedded applications. Jumper wires often appear in the form of an insulated cable terminated with some type of connector, such as a 2.54 mm pitch male or female connector, two, four, or six-pin jumper, or a variety of breadboard-compatible plugs. The pitch of the connector may differ depending on the application.

In order to meet design requirements, jumper wires are often required to be pre-crimped with a terminal connector; this eliminates any additional soldering work for the designer. The terminal may be a male or female, insulated, or fully-sealed, or non-insulated style. The connector also may be specialized to accurately fit into the holes or pins on the target board.

Pre-Crimped Leads

Pre-crimped leads, like the H3BXT-10104-Y8, are best suited for high-mass applications where a large number of conductors are necessary. The flexibility of multiple conductors also reduces the complexity of a design, as it eliminates the need to separately connect individual components. This makes the design process much simpler and easier than if each component required wiring through a board or cable configuration.

The H3BXT-10104-Y8 is designed for high-mass applications, where multiple conductors are required. The leads are pre-crimped with a connector at one end, and a female terminal at the other. This eliminates the need for additional assembly time in connecting the components. The pre-crimped exterior insulation is heat-shrink type PVC. The required continuity is achieved by the braid of the cable.

Working Principle

The working principle of pre-crimped leads, such as those in the H3BXT-10104-Y8 series, is simple and effective. The pre-crimped lead is inserted into a pre-made cable connection (such as a male or female RJ-45), which creates an electrical connection between the two components. The PCB then forms the basis of the connection path, with the two components seated in the correct gaps. Finally, the cable acts as the conductor, providing the necessary continuity and low-resistance connection path between the two components.

The H3BXT-10104-Y8 series offers the user a complete solution for quick and easy electrical connections between circuit boards. The individual leads serve as a trusted, reliable source of electrical connections, thus eliminating the need for additional components. The ease-of-use ensures that the user has greater control of the overall design and that they don’t need to worry about any loss of signal or power.

The specific data is subject to PDF, and the above content is for reference