H4BBT-10102-R8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires or sometimes known as jumper cables are electrical wires with pre-crimped leads at the ends to facilitate connection between two points. Usually these points are test points in electronic circuit boards or between components of circuits and these wire links can be used to complete the circuit. Jumper wires are often labeled for their purpose or polarity for ease of use and identification.

H4BBT-10102-R8

The H4BBT-10102-R8 is a jumper wire designed to provide electrical connections between devices. It features an overall length of approximately 2.25 inches and is designed to fit through a 0.093 inch hole or clearance. The H4BBT-10102-R8 is constructed of 18 AWG copper wire and insulated with durable polypropylene. The crimp connector on each end facilitates a secure connection with equipment such as printed circuit boards.

H4BBT-10102-R8 Application Field

The H4BBT-10102-R8 is most widely used in the industrial electronics and precision instrument assembly fields. It is used to help provide connections between components such as sensors, thermostats, and printed circuit board. Such jumper wires are also used in robotics assembly or other complex circuit wiring and testing purposes.

H4BBT-10102-R8 Working Principle

The H4BBT-10102-R8 is designed to provide a quick and easy connection between two points in an electrical circuit. The crimp connectors on each end of the jumper wire allow it to snap onto and provide secure contact with equipment such as PCBs or components. These pre-crimped leads are made from high quality material that is highly resistant to fatigue and vibration ensuring a safe connection and long-term reliability.

Pre-Crimped Leads

Pre-crimped leads are typically soldered onto the leads of electrical components such as sensors, transistors, resistors, and circuit boards. Pre-crimped leads provide a secure connection that is usually more reliable than a mechanical connection and helps reduce installation time compared to wiring connections. Pre-crimped leads feature an insulation material around the wire which provides additional protection and also improves ease of movement during assembly.

H4BBT-10102-R8

The H4BBT-10102-R8 pre-crimped lead has an overall length of approximately 2.25 inches and is designed to fit through a 0.093 inch hole or clearance. It is constructed from 18 AWG copper wire and insulated with durable polypropylene. The crimp connector on each end facilitates a secure connection with equipment such as printed circuit boards.

H4BBT-10102-R8 Application Field

The H4BBT-10102-R8 pre-crimped lead is used in much the same way as the jumper wire version. It is often used to provide electrical connections between components such as sensors, thermostats, and PCBs. Moreover, the H4BBT-10102-R8 pre-crimped lead can also be used in robotics assembly and other complex circuits where reliable connections are need.

H4BBT-10102-R8 Working Principle

The H4BBT-10102-R8 pre-crimped lead is designed to provide a secure connection with components that need to be soldered. The crimp connectors on each end of the lead allow for secure and reliable connection and the high quality material ensures the connection is highly resistant to fatigue and vibration. Moreover, the insulation material provides additional protection and makes the soldering process easier.

The specific data is subject to PDF, and the above content is for reference