H4BBT-10103-Y8

Jumper Wires

Jumper Wires are cables used to connect two points in a circuit. They are usually bare, meaning they lack insulation. The contacts on the wire are usually tinned stranded copper, with the coax center conductor being optional. The contact surface of the wire may be either serrated or crimped. While serrated contacts are ideal for applications that require frequent movement of the wire, such as when a circuit is being tested or repaired, crimped contacts are a better fit for projects that need to make a strong, permanent connection.

Jumper Wires can also come in various colors, allowing for both aesthetic appeal and helpful organization of a circuit or project. There are 3 numbered standards of wire size commonly used in electronics, represented by the AWG (American Wire Gauge) rating, ranging from 25AWG (the least) to 19AWG (the most). While 26AWG is the smallest wire size, it generally isn’t recommended for most applications as it lacks the durability and current capacity of thicker diameters of wire.

Pre-Crimped Leads

Pre-Crimped Leads are plastic-covered wires with the crimp contacts already attached. The contacts are usually made of brass, although some wires may also be made of stainless steel or aluminum. These leads are wired in a specific pattern for the desired connection. The purpose of Pre-Crimped Leads is to make it easier for electronic technicians to attach multiple components in a simple and effective way without risking short circuit to occur due to poor soldering or lack of insulation.

Pre-Crimped Leads come in two main configurations, crimped contacts and pre-wired clips. The crimped contacts are designed to slide into pre-cut grooves of the corresponding receiving connector. These connectors are used on the receiving end of the wire to ensure that all connections are secure. The pre-wired clips are designed to be plugged into the desired receiving connector, provided that the connector is designed with slots designed to accept the clips.

H4BBT-10103-Y8 Application Field and Working Principle

The H4BBT-10103-Y8 is a type of pre-crimped leads designed to connect two points in a circuit. It is specifically designed to provide a connection between mobile communications systems and the switching systems of a mobile network operator. It has a copper contact area and an insulation layer which protects the wire from short-circuits. The insulation layer is heat-resistant and can withstand temperatures ranging from -20°C to +70°C.

The H4BBT-10103-Y8 is rated at 7A and is suitable for use in applications that require long transmission distances between two points. It is also compatible with RAP/PDH series connectors, and is ideal for use in automotive or marine electronics projects. The H4BBT-10103-Y8 is also RoHS compliant and EMC certified, making it a safe choice for electronic projects.