H50230510000G

Wire Gauge or Range - AWG:	16-28 AWG
Insulation Height:	0.488" (12.40mm)
Contact Tail Length:	--
Housing Material:	Thermoplastic
Contact Material:	Phosphor Bronze
Wire Strip Length:	9-10mm
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Mating Flange
Contact Mating Finish:	Tin
Operating Temperature:	-40°C ~ 115°C
Color:	Green
Wire Gauge or Range - mm²:	--
Series:	H5
Voltage - UL:	300V
Current - UL:	4A
Current - IEC:	--
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screwless - Leg Spring, Push-In Spring
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.150" (3.81mm)
Number of Levels:	1
Positions Per Level:	2
Number of Positions:	2
Type:	Plug, Male Pins
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of Terminal Blocks–Headers, Plugs and Sockets

Terminal blocks, also known as headers, plugs and sockets, are a type of electrical wiring connectors, which are widely used in the electrical and electronics field. It is typically a Printed Circuit Board (PCB) connector that allow electrical signals and power signals to be transmitted from one location to another.

The application of H50230510000G Terminal Block

H50230510000G terminal block is a two-pole/terminal block which is compatible with industry standards. It is a panel mountable terminal block for use in a wide variety of applications. It is typically used in the wide range of applications such as audio equipment, industrial machinery, control panels, computers, etc.The H50230510000G terminal block has a unique design which allows different configurations in order to meet a wide range of applications. It is a dual-pole/terminal block that has two poles (A and B) connected with a jumper. The poles are separated by a rail and each of them provides a contact point for an electrical signal. The jumper provides a conduit between the two poles and enables both of them to be connected, thus allowing the electrical current to pass between them. The terminal block also features two solder screw connections (A and B) which allow the connection of different electrical components such as resistors, transistors, etc.

Working Principle of H50230510000G Terminal Block

The H50230510000G terminal block works on the principle of electrical current flow. When current flows between two poles (A and B) of the terminal block, it creates a voltage differential. This voltage differential is detected by a sensing circuit. The sensing circuit sends a signal to a controller or a relay which then triggers a response. Depending on the type of application, the response can be a relay switching action or a LED light being illuminated.The terminal block also acts as an insulator when the current flows through, protecting against short circuits and other dangerous electrical hazards. In addition to providing electrical insulation, it also aids in the prevention of loose connections and reduces the risk of sparks when attaching or disconnecting wires.

Conclusion

H50230510000G terminal block is a popular electrical wiring connector, which is widely used for different applications in the electrical and electronics field. It is a panel mountable terminal block for use in a wide variety of applications. The unique design of the terminal block allows different configurations to meet different applications. It works on the principle of electrical current flow. The terminal block not only acts as an electrical insulator, but also helps to prevent loose connections and sparks when attaching or disconnecting wires.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description