H5BXT-10106-L7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper Wires is an electronics component used to connect two points in a circuit without the need for a soldered connection. Jumper Wires are typically made from insulated wire with insulated slots on the ends of each wire. These slots are designed to fit closely to the pads on a printed circuit board and are typically made from a copper material. The connection on the printed circuit board is made by pushing the slot on the jumper wire onto the pad, where the connection is then held in place with friction. Jumper Wires are available in a variety of colors and sizes, generally determined by their gauge.

Pre-Crimped Leads

Pre-Crimped Leads are a popular way to connect electronic parts. It is a pre-shaped, ready-to-fit, self-insulating connection. Pre-Crimped Leads are created by crimping a metal housing with metal terminals to the wire. The housing creates protection and insulation between the metal terminals and wire. The metal terminals often snap onto the printed circuit boards to provide a connection point for components or other circuits. Pre-Crimped Leads are often used to create a convenient and fast connection method. Alternatively, Pre-Crimped Leads can also be used as insulation displacement connectors.

H5BXT-10106-L7 Application Field and Working Principle

The H5BXT-10106-L7 is a super power chip which is used in a variety of electronic applications. It is a post-mount system with a flat base that provides contact with nearly any printed circuit board up to 0.8mm thick. H5BXT-10106-L7 is designed for use with Jumper Wires and/or Pre-Crimped Leads, enabling users to create a reliable connection between components and/or circuits. It features a durable plastic housing, three-terminal connections, and an adjustable height lever that allows for easy adjustments.

H5BXT-10106-L7 works by establishing an electrical connection between two electronic components or circuits using Jumper Wires or Pre-Crimped Leads. The plastic housing can be clamped onto a printed circuit board using the adjustable height lever. The three terminals on the bottom of the housing provide contact pads for connecting the Jumper Wires or Pre-Crimped Leads. When the Jumper Wires or Pre-Crimped Leads are connected to the contact pads, the connection is established. This connection can then be used to power up the circuit and establish data transfer between the circuit and the component(s).

The specific data is subject to PDF, and the above content is for reference