H6BXT-10112-S7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are electrical interconnect devices that are used to interconnect electronic components on a circuit board. They are typically soldered onto the board or in some cases are simply connected together using butt-end connectors. The jumper wire itself is usually made of a metal conductor, such as copper, aluminum, or stainless steel. It may be insulated with PVC, rubber, or a variety of other materials. The most common sizes of jumper wires are AWG (American Wire Gauge) 30 and AWG 28. They are available in standard lengths from 1-9 inches (2.5-22.9 cm).

Pre-Crimped Leads

Pre-crimped leads are electrical interconnect devices that are pre-crimped to the metal conductor of a jumper wire. The advantage of the pre-crimped lead is that it provides a secure mechanical connection between the jumper wire and whatever connector is used for the application. This eliminates the need for adhesives, soldering, or other complex processes. Pre-crimped leads are available in a variety of sizes, and can be used for a wide variety of applications. The most common types are AWG 30 and 28.

H6BXT-10112-S7 Application Field and Working Principle

The H6BXT-10112-S7 is a jumper wire or pre-crimped lead used to connect or bridge two components on a circuit board. It is typically used as an interconnect to connect various points on the board, such as power and ground, or signal paths. The H6BXT-10112-S7 is designed to carry a maximum current of 1.5A and an insulation resistance of greater than 10MΩ. The wires are insulated with PVC and have a ultimate tensile strength of 7.7kgf (17lbs).

The H6BXT-10112-S7 has a variety of applications in the electronics industry, such as in audio equipment, communication devices, sequencers, and various other equipment. It is commonly used for controlling power, making signal routes, and connecting I/O ports. The working principle is simple: the jumper wire or pre-crimped lead is connected to two electronic components, providing an electrical bridge between the two components, thus allowing electricity to flow from one component to the other. In most cases, the components that need to be connected are close to each other, thus making it easy to use the jumper wire or pre-crimped lead.

The H6BXT-10112-S7 can be used in a variety of scenarios, such as connecting circuit boards in a larger system, connecting I/O ports, or connecting control points from an external device to a controller. It is also commonly used to bridge two separate points on a single circuit board. The proper installation of the H6BXT-10112-S7 dictates the quality and the amount of current that can be safely passed through it. It is important to ensure that the connection is secure and properly insulated. When verifying the connection, it is important to test for continuity with a suitable meter to verify that the connection is secure.

The H6BXT-10112-S7 jumper wire or pre-crimped lead is a versatile and reliable interconnect solution. It is perfect for use in a variety of applications requiring an efficient and secure connection of two electronic components. Its reliable design and strong construction allow for a reliable connection that will last for years. As such, it is an ideal choice for the electronics enthusiast looking for an affordable and reliable interconnect solution.

The specific data is subject to PDF, and the above content is for reference