HAL210JQ-K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Magnetic sensors have a wide range of applications, with the broadest being in the automotive industry. The HAL210JQ-K is a solid state magnetic switch used for detection of magnetic fields such as those created by a permanent magnet, an electromagnet, or an induction coil. It is typically employed in applications that include automotive differential gearbox position detection, wind turbine blade angle detection, and vehicle wheel position detection. The HAL210JQ-K is a single-pole, single-throw (SPST) device which uses Hall effect technology to detect a magnetic field. The switch is composed of three parts, a main body, a magnet, and a gasket.

The main body is a sealed unit, usually made of plastic, that houses the sensing element and the electronics necessary to process the signals. The sensing element is a Hall Effect device consisting of a tiny substrate containing a semiconductor material that produces an output signal when a magnetic field is present. This output is used to drive the switching action, either opening or closing the circuit, depending on whether the switch is normally open or normally closed. The design of the switch also allows for hysteretic switching, which prevents false triggers due to small changes in the magnetic field.

The magnet is the part of the HAL210JQ-K that creates the magnetic field to be detected. It consists of a core material, such as ferrite, that is embedded with neodymium-iron-boron (NdFeB) magnets. The magnet produces a bi-directional field that can be polarized and hence enhance detection sensitivity. It is also designed to make the switch robust against vibratory environments.

Finally, a gasket is used to seal the switch and ensure reliable and repeatable operation in harsh environments. The gasket can also be used to reduce noise and interference from external magnetic or electrical sources.

To operate the switch, an alternating current is applied to the sensing element and the strength of the magnetic field is measured. If the strength of the field exceeds a certain level, the switch will change state. This change of state can be used to activate an output signal, such as a relay or a transistor, in order to perform a specific set of tasks.

In summary, the HAL210JQ-K is a robust and reliable solid state magnetic switch suitable for applications where high levels of environmental protection, accurate switching, and shock resistance are required. It is particularly suitable for automotive applications, but can also be used in other applications such as wind turbine blade angle detection, vehicle wheel position detection, and other industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference