HCNW135

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components that provide an electrical isolation between two circuits. They are commonly used for protection against damaging electrical surge currents that can occur in power or data lines and in signal processing applications. HCNW135 is a special type of optoisolator which uses a transistor and a photovoltaic output to provide the necessary electrical isolation. In this article, we will discuss the application field and working principle of HCNW135.

The HCNW135 is a 4-pin optoisolator which consists of an emitter, a collector, and a photovoltaic output. It is designed to provide electrical isolation of up to 1KV rms between the input and the output circuit. The device is commonly used for signal processing, data line protection, and power MOSFET protection. Additionally, it is capable of switching up to 100mA of load current and has a low input voltage range of 2.7V to 5.5V.

The HCNW135 has several features that make it an ideal choice for applications requiring optoisolator protection. It has an ultra-fast response time of less than 0.25uS, and the high-voltage isolation between the input and output circuit ensures that the device does not suffer from electrical interference or leakage. Additionally, the device is designed to be highly efficient, with a power consumption of just 0.45W.

The working principle of the HCNW135 is quite simple. It consists of an emitter, a collector, and a photovoltaic output. When an input voltage is applied to the device, the photovoltaic output generates a current that is proportional to the input voltage. This current is then amplified by the transistor and applied to the output circuit to switch the load current.

In conclusion, HCNW135 is an optoisolator that is designed to provide electrical isolation up to 1KV rms. It is commonly used for signal processing, data line protection, and power MOSFET protection. The device features an ultra-fast response time of less than 0.25uS and a low input voltage range of 2.7V to 5.5V. Additionally, it has a high efficiency and is capable of switching up to 100mA of load current. Finally, the working principle of the HCNW135 is based on a simple transistor and photovoltaic output configuration, which amplifies the input voltage and applies it to the output circuit.

The specific data is subject to PDF, and the above content is for reference