HCNW2201#300

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output are used to prevent high-voltage signals present in the input circuit from damaging the connected circuit or device. The HCNW2201#300 is an optoisolator in this category. This article will discuss the application field and working principle of this device.

Application Field

The HCNW2201#300 optoisolator is a MOSFET output optocoupler designed to meet the ongoing requirements for design flexibility and small form-factor. It is suitable for logic output isolation, protection, and signal conditioning of 3.3V, 5V, and 12V systems. Its logic output signal has a minimum input current rating of 4mA, and a minimum output voltage rating of 12V. This device is a great choice for applications such as RS-232/RS-422/RS-485 and CAN bus systems.

This device is also suitable for applications such as logic level translation, switching, and data buffering. Its high-speed switching capability of up to 200Mbps makes it suitable for use in other applications, such as automotive, telecommunications, industrial, and medical. As it is low-power, it is also suitable for applications that require low power consumption, such as battery-powered devices.

Working Principle

The HCNW2201#300 optoisolator consists of a light-emitting diode (LED) optically coupled to a photo detector transistor (PDT). When a voltage is applied to the input terminals of the optocoupler, it causes the LED to emit photons, which are then detected by the PDT. The PDT amplifies the received signal and switches the output transistor accordingly. This process isolates the input from the output circuit, thereby protecting the connected device from high voltage signals present in the input circuit. The output circuit can be used to drive logic circuits, such as those used in microcontrollers.

The PDT has three main elements: the base, the collector, and the emitter. The base is responsible for receiving the photon signal from the LED and amplifying it. The collector acts as an amplifier, and the emitter acts as the output terminal. When the input signal is low, the LED does not emit photons, which results in no signal being detected by the PDT. This causes the output transistor to remain OFF, and the output voltage to be 0V.

When the input signal is high, the LED emits photons, which are detected by the PDT. This causes the output transistor to switch ON, and the output voltage to be a high voltage. This high voltage can then be used to drive a logic circuit, such as a microcontroller.

The HCNW2201#300 optoisolator is a great choice for applications that require high-speed switching, low power consumption, and high EMC immunity. Its flexible and small form-factor makes it suitable for applications ranging from automotive to medical. This device is a great choice for logic output isolation, protection, and signal conditioning of 3.3V, 5V, and 12V systems.

The specific data is subject to PDF, and the above content is for reference