HCNW4502#300

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output, such as HCNW4502#300, provide electrical isolation between two circuits, allowing the electrical isolation of two circuits while maintaining communication between them. This type of optocoupler is equipped with a photodetector attached to a 660nm wavelength gallium-arsenide infrared LED. The optocoupler also employs integrated circuitry that is used to regulate the functioning of the optocoupler.

The HCNW4502#300 is an IEC61000-4-2 Level 3 standard opto device, meaning it has a specified radiated immunity field strength of up to 10V/m. The optocouple can convert analog signals which are inputted from side A to digital logic signal on side B. This is defined as the active high, which means the collector or output voltage is high when the LED is illuminated.

The working principle of the HCNW4502#300 involves the transmission of electrical signals from one side of the optoisolator to the other without allowing any direct current flow between the two sides. This is achieved by using the optocoupler LED, which acts as a sender, and a phototransistor, which acts as the receiver. When the LED is switched on, the photodetector located inside the optoisolator, absorbs some of the LED light energy, which is then converted into electrical signals through the phototransistor.

The electrical signals from the phototransistor are then amplified by the integrated circuitry. The amplified signals are then outputted, providing the required electrical isolation between the two circuits that the optocoupler was designed to provide. Additionally, the HCNW4502#300 opto device has a wide operating temperature range of -40⁰C to +100⁰C, which makes it suitable for use in extreme environmental conditions.

The HCNW4502#300 optoisolator can be used in a variety of applications, including secure communications, protective relays, measuring and monitoring systems, industrial automation and automotive applications. These optoisolators are also widely used in medical equipment, telecommunications, consumer electronics and other applications that require electrical isolation from other systems.

In summary, the HCNW4502#300 optoisolator is a useful device which is designed to provide electrical isolation between two circuits while allowing communication between them. This can be very helpful, especially in applications such as those mentioned above, where electrical isolation is a must in order to ensure safety and accuracy. The HCNW4502#300 opto device is also highly reliable, which makes it an ideal choice for applications that require secure data transfer.

The specific data is subject to PDF, and the above content is for reference