HCPL-2232-300E

Data Rate:	5MBd
Supplier Device Package:	8-DIP Gull Wing
Package / Case:	8-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply:	4.5 V ~ 20 V
Current - DC Forward (If) (Max):	10mA
Voltage - Forward (Vf) (Typ):	1.5V
Rise / Fall Time (Typ):	30ns, 7ns
Propagation Delay tpLH / tpHL (Max):	300ns, 300ns
Series:	--
Current - Output / Channel:	25mA
Output Type:	Push-Pull, Totem Pole
Input Type:	DC
Common Mode Transient Immunity (Min):	10kV/µs
Voltage - Isolation:	3750Vrms
Inputs - Side 1/Side 2:	2/0
Number of Channels:	2
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HCPL-2232-300E Optoisolator - Logic Output

The HCPL-2232-300E is an optoisolator that is designed for use in logic output applications. This device is a single-channel, high-speed optocoupler that is designed to isolate digital data signals from the effects of noise. The HCPL-2232-300E optoisolator helps reduce crosstalk and interference in logic level communications.

Overview of the HCPL-2232-300E Optoisolator

The HCPL-2232-300E optoisolator is a logic output type optoisolator with a 6-pin dual-in-line package. It is constructed with a GaAs LED, an integrated detector, and a MOSFET output device. The LED on the device operates at a wavelength of 905nm and can be driven with an input voltage from 4V to 40V with a maximum current of 25mA. The optoisolator has a typical peak current transfer ratio (CTR) of 500% at a specified input current of 5mA.The device has a basic on/off state, with the output switching on when the LED is emitting light and off when it is not. The optoisolator also has a very fast switching speed with a maximum propagation delay of 5ns. Additionally, the device has high common mode transient immunity of 30kV/usec.

Application Fields of HCPL-2232-300E

The HCPL-2232-300E optoisolator is designed for a wide range of applications. It is well-suited for applications in which isolation between the input and output is required, such as data communications, motor control, security systems, etc. It is also suitable for isolating microphones from high levels of noise. Additionally, the HCPL-2232-300E is well-suited for isolated logic level signaling applications.

Working Principle of the HCPL-2232-300E

The HCPL-2232-300E optoisolator is a single-channel optocoupler that is designed to provide galvanic isolation between the input and output devices. The device uses a light emitting diode (LED) and a MOSFET output to create an optically isolated connection.The input side of the device consists of an LED that is driven by an input voltage. When the LED receives an input voltage, it emits a light beam that is received by a photodiode on the output side. The photodiode converts the light beam into an electrical current which drives the MOSFET output. This allows the output to switch on and off, isolating the input and output devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description