HCPL-2400-000E

Data Rate:	40MBd
Supplier Device Package:	8-DIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply:	4.75 V ~ 5.25 V
Current - DC Forward (If) (Max):	10mA
Voltage - Forward (Vf) (Typ):	1.3V
Rise / Fall Time (Typ):	20ns, 10ns
Propagation Delay tpLH / tpHL (Max):	55ns, 55ns
Series:	--
Current - Output / Channel:	25mA
Output Type:	Tri-State
Input Type:	DC
Common Mode Transient Immunity (Min):	1kV/µs
Voltage - Isolation:	3750Vrms
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The HCPL-2400-000E is an optoisolator, specifically a logic output, from Broadcom. Optoisolators are components that provide an electrically isolated connection between circuits. This is essential in some applications, such as when components are powered by different voltage sources. By using optoisolators, a safe and reliable interconnection can be maintained without the need for a direct electrical connection.

Application Field

The main application fields for the HCPL-2400-000E are industrial control systems that use digital signals for remote control applications, process control communication and industrial machine equipment. HCPL-2400-000E allows for data transfer across longer distances and provides an electrically isolated connection between two circuits.

Structure & Working Principle

The HCPL-2400-000E consists of three main sections: an infrared emitting diode, a phototransistor detector, and a high-frequency common-mode filter. When an input signal is applied to the emitter diode, the diode emits a beam of infrared light. This light is then detected by the phototransistor detector, which amplifies the signal and outputs it. The filter blocks any extraneous high-frequency signals, allowing only the desired signal to be transmitted.The output signal from the HCPL-2400-000E is optically isolated from the input; this means that any microscopic changes in voltage levels, capacitance, temperature or humidity will not affect the output. The device is also protected against transient voltage surges, as any voltage above a certain limit is blocked by the filter. This makes it ideal for applications where power surges or electromagnetic interference are expected.

Strengths & Weaknesses

The primary advantages of the HCPL-2400-000E are its high input/output isolation, its ability to block power surges and its resistance to electromagnetic interference. Its small size also makes it suitable for space-constrained applications. However, the device is relatively expensive, and it has slow switching speeds due to its input/output isolation design.

Conclusion

The HCPL-2400-000E is a high-performance optoisolator specifically designed for industrial control applications. It provides electrically isolated connections between circuits, allowing for data transfer over long distances. It is protected against transient voltage surges as well as electromagnetic interference. Its main disadvantages are its high cost and slow switch speeds, but it is an ideal choice in applications where these limitations are acceptable.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description