HCPL-2411#500

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Number of Channels:	1
Inputs - Side 1/Side 2:	1/0
Voltage - Isolation:	2500Vrms
Common Mode Transient Immunity (Min):	1kV/µs
Input Type:	DC
Output Type:	Tri-State
Current - Output / Channel:	25mA
Data Rate:	40MBd
Propagation Delay tpLH / tpHL (Max):	55ns, 55ns
Rise / Fall Time (Typ):	20ns, 10ns
Voltage - Forward (Vf) (Typ):	1.3V
Current - DC Forward (If) (Max):	10mA
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	8-SMD, Gull Wing
Supplier Device Package:	8-DIP Gull Wing

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:The HCPL-2411#500 is a type of optoisolator, which provides electrical isolation between its two input circuits. It utilizes a light-emitting diode (LED) and a phototransistor to isolate one circuit from the other. Optoisolators are used in a wide variety of applications, from medical to automotive, where it is essential to protect sensitive signals from damage due to high voltage or magnetic interference. Application Field: The optoisolator HCPL-2411#500 is designed for digital logic circuit isolation requirements. It is ideal for use in both high and low voltage logic circuit applications, as it has a high isolation voltage rating of 5000V RMS minimum. This device is also capable of responding to low level input signals from 0.8V logic levels, making it suitable for use in a wide range of applications such as automotive systems, control systems, instrumentation, industrial process control, audio/video systems, and telecommunications equipment.HCPL-2411#500 also supports high speed data transmission, with a switching time of 0.1µs, which makes it ideal for use in high speed data communication applications. The device is also highly resistant to ESD and surge voltage, with a breakdown voltage of 8.0kV. In addition, it has an optical current transfer ratio of 500% and low saturation voltage of 0.2V, which improves its performance in signal transmission applications.Working Principle:HCPL-2411#500 optoisolator operates using a light-emitting diode (LED) connected to the input port, and a phototransistor connected to the output port. When an input signal is applied to the LED, it emits a certain level of light. This light is received by the phototransistor, which, in turn, switches on and off according to the light pulse.The phototransistor is a bipolar transistor, which acts as a switch. When light is received from the LED, the transistor switch is closed. This creates a connection, allowing current to flow between the input and the output. The current flow is reflected in the output voltage, which is proportional to the input voltage. Consequently, the output voltage is a copy of the input voltage, but with electrical isolation, as the two circuits are isolated from each other.Conclusion:The HCPL-2411#500 optoisolator is a valuable device for electrical isolation and data transmission applications. It has a high isolation voltage rating, and is capable of responding to low level input signals. It also has a switching time of 0.1µs, making it ideal for use in high speed data communication applications. Its low saturation voltage of 0.2V makes it suitable for driving signal transmission applications. It is highly resistant to ESD and surge voltage, with a breakdown voltage of 8.0kV.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description