HCPL-2601-060E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices that can provide electrical isolation between two systems, by using an optic output (light emitting diode) to drive a phototransistor or phototriac. This can greatly reduce the risk of causing damaged to equipment due to incorrect voltage levels, or due to voltage or current spikes on one system affecting the other. The HCPL-2601-060E is a logic output optoisolator which can be used to provide this type of protection.

The HCPL-2601-060E is a packaged optocoupler consisting of an AlGaAs LED, optically coupled to a high gain open collector phototransistor. It has an 8-pin IC package, and its output is capable of sinking up to 80mA from the collector. The input has a minimum current transfer ration that is that is typically greater than 50% to ensure that the LED stays on when driven with TTL (transistor-transistor logic) levels. The device can be used for a wide range of input levels thanks to the 100K ohm input resistor.

In terms of applications, the HCPL-2601-060E can be used anywhere that an electrical isolation is needed between two circuits. This could include automotive applications where the logic output can be used to control an electric motor, or in industrial applications where the device could be used to interface two isolated systems. It could also be used in communication circuits, such as an RS-232 port, to provide a safe level of protection to the receiving system.

In terms of working principles, the HCPL-2601-060E features an LED operating on the principle of light emission. When a certain level of current passes through the LED, it produces photons of light, which are then reflected off of the reflective surface of the device. These photons are then captured by the phototransistor, which then triggers a current flow in its collector-emitter pins. This current signaling can then be used to power an electrical device or actuate a physical switch.

Therefore the HCPL-2601-060E provides a reliable way of protecting one system from the other, by providing a physical barrier between the two systems. It is also highly reliable, low power, and easy to use. It is thus an ideal solution for providing isolated logic protection in a wide range of applications. The device can be used to provide an electrical barrier between two systems, and is thus highly suitable for the protection of the receiving side in communication circuits.

The specific data is subject to PDF, and the above content is for reference