HCPL-263N-320E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators (also called optocouplers or opto-isolators) are electronic components that provide electrical isolation between two electrical circuits. This type of optoisolator, the HCPL-263N-320E, is classified as a Logic Output optoisolator. Logic Output optoisolators isolate and transfer a logical level from one side of the circuit to the other, and are commonly used to permit proper, reliable communication between logic systems that operate at different voltage levels. The HCPL-263N-320E specifically allows signal transfer between 5V and 3.3V logic devices, while ensuring isolation and protecting the circuits from induction and other electrical interference.

The HCPL-263N-320E Logic Output optoisolator consists of two separate parts that are electrically isolated from each other: a light emitting diode (LED) and a photodetector with a logic output. The LED is responsible for converting electrical input signals into optical output signals, while the photodetector is responsible for converting the optical output signals back into electrical input signals. Of note, the diode side of the optoisolator requires 3.7mA at a maximum forward voltage of 25V, while the phototransistor side requires a maximum reverse voltage of 10V and a maximum forward current of 1mA.

When the LED is powered up, it will emit light which is then detected by the phototransistor. This will cause the phototransistor to turn on and supply a logic-level output of either high (5V) or low (0V). This behavior is determined by the voltage present on the LED side of the optoisolator: if the voltage is high, the logic output will be high, while if the voltage is low, the logic output will be low. It should be noted that the HCPL-263N-320E has a logic input threshold of 3V for a low logic level input, and over 4V for a high logic level input.

The HCPL-263N-320E Logic Output optoisolator is used in a wide variety of applications, such as in industrial control systems, motor control systems, alarm systems, power controllers, and electrical safety systems, to name a few. It is also used in data transmission systems as it can be used to isolate the transmitting device from the receiving device. This helps to maintain signal integrity and prevent damage due to induced electrical noise.

In conclusion, the HCPL-263N-320E Logic Output optoisolator is a versatile electronic component that provides electrical isolation between two separate electrical circuits. It allows logic signals to be transmitted between two circuits, while protecting the circuits from electrical interference. Its wide range of applications, from industrial control systems to data transmission systems, further demonstrate its versatility and usefulness.

The specific data is subject to PDF, and the above content is for reference