HCPL-3140#060

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Isolators - Gate Drivers

Isolators – Gate Drivers are electronic components designed to provide electrical isolation and enhanced drive capability for controlling power semiconductor devices. The HCPL-3140#060 from Agilent Technologies is a single-channel optocoupler isolation used in high-speed switching circuits. It has two isolated channels, one on each side of an optical isolator barrier.

Features and Benefits

The HCPL-3140#060 is small in size (13 mm by 6.1 mm) and has a low profile of 0.64 mm with a 2.54 mm pin pitch. It operates up to a maximum of 12 Mbps with a low power consumption of 25 mW typical and 35 mW maximum. The optocoupler features a wide isolation voltage rating of 5000 Vrms/1 minute with an open-collector power output of up to 200 mA.

The HCPL-3140#060 also has over-current protection that will shut down the output if the current goes above 200mA. This prevents possible damage to the device due to a reversed wiring condition or short-circuiting of output pins. The optocoupler also has a built-in hysteresis switching so that the output will remain stable at any input signal frequency.

Application Fields

The HCPL-3140#060 is suitable for applications in systems with high electromagnetic interference, such as solar inverters, motor drives, power supplies, and power converters. The optocoupler is used to control the speed and power of motors, as well as to ensure reliable data transmission from one device to another. It is also used in industrial automation systems, where it is essential to maintain electrical isolation between circuits of different power. The optocoupler can be used in motor control, LED lighting, automotive, and HVAC systems, as well as in temperature monitoring and low voltage protection.

Working Principle

The HCPL-3140#060 uses a standard optocoupler construction. Its two isolated channels are formed using a photodiode, which converts received electrical signals into optical ones on one side, and a phototransistor, which changes the optical signals back into electrical ones on the other side. The signal on one side is completely isolated from the other side by an optical barrier, which means that the device can provide high-speed switching without the risk of interference.

The optocoupler features a 1:2 transmission ratio, which means that it can be used to drive output devices up to 200 mA. Additionally, it has a high current transfer ratio of 500% and an isolation voltage rating of 5000 Vrms/1 minute, providing reliable performance in high-power and high-voltage applications.

The HCPL-3140#060 provides the benefits of isolation in a compact package that is suitable for use in a variety of applications. It is capable of fast switching at speeds up to 12 Mbps, with low power consumption, and over-current protection in the event of a reversed wiring condition or short circuit of output pins.

The specific data is subject to PDF, and the above content is for reference