HCPL-5301#300

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HCPL-5301# 300 is a type of optoisolator, most commonly referred to as a logic output optoisolator. It is designed to provide electrical insulation between two circuits while allowing communication between them in the form of two-way optical signaling.

An optoisolator is an electronic component that uses a light-emitting diode (LED) to isolate input and output, blocking any voltage spikes that may cross over the boundaries. This type of optoisolator is specifically designed for logic signals and consists of a source for logic signals, such as a microcontroller or gate output, and a phototransistor that interprets the signal.

The HCPL-5301# 300 logic output optoisolator is designed for a wide range of applications. The operating and storage temperature range is -40°C to +85°C and it can operate over a large range of input and output voltages. It is optimized to be used in industrial automation systems, data telecommunication systems, as well as many other industrial applications.

The HCPL-5301# 300 has two ports for connection. An input port accepts bipolar digital-logic signals from a device such as a microcontroller or a gate output. The logic levels for the input port range from 10mV to 24V at sink and 5mV to 15V at source. The output port provides an isolated logic output which is also a bipolar logic signal. The output port can be connected to a TTL logic component.

The HCPL-5301# 300 also integrates an open-collector output which allows the circuit designer to control the logic flow. This limits the current into the output circuit, allowing for a more robust and reliable optoisolator. The optoisolator is also designed to use both snubbers and diodes to further protect the integrity of the circuit from voltage spikes.

The working principle of the HCPL-5301# 300 is simple. The LED in the input port is activated when a logic signal is applied and emits a light beam that is detected by the phototransistor. The phototransistor then converts the light beam into an electrical signal that is sent to the output port. This allows for a completely isolated circuit where the input and output signals do not interact with each other.

The HCPL-5301# 300 optoisolator is highly efficient, reliable, and cost-effective. It provides electrical isolation between circuits with minimum signals loss. It is versatile and can be used in many applications, such as industrial automation, data telecommunication, and medical equipment. It is also well-suited for applications where power efficiency, speed, and reliability are of paramount importance.

The specific data is subject to PDF, and the above content is for reference